Yttria stabilized zirconia
Yttria stabilized zirconia 物理性質
- 融点 :
- >2,600°C (lit.)
- 比重(密度) :
- 5.87 g/cm3
- 外見 :
- サブミクロンパウダー
Yttria stabilized zirconia 価格
もっと(4)
メーカー |
製品番号 |
製品説明 |
CAS番号 |
包装 |
価格 |
更新時間 |
購入 |
Sigma-Aldrich Japan
|
464228 |
酸化ジルコニウム(IV)-固定化イットリア submicron powder, 99.9% trace metals basis (purity excludes ~2% HfO2)
Zirconium(IV) oxide-yttria stabilized submicron powder, 99.9% trace metals basis (purity excludes ~2% HfO2) |
114168-16-0 |
100g |
¥16700 |
2024-03-01 |
購入 |
Sigma-Aldrich Japan
|
464228 |
酸化ジルコニウム(IV)-固定化イットリア submicron powder, 99.9% trace metals basis (purity excludes ~2% HfO2)
Zirconium(IV) oxide-yttria stabilized submicron powder, 99.9% trace metals basis (purity excludes ~2% HfO2) |
114168-16-0 |
500g |
¥43800 |
2024-03-01 |
購入 |
Sigma-Aldrich Japan
|
572349 |
酸化ジルコニウム(IV)-固定化イットリア nanopowder
Zirconium(IV) oxide-yttria stabilized nanopowder |
114168-16-0 |
25g |
¥35500 |
2024-03-01 |
購入 |
Sigma-Aldrich Japan
|
774049 |
Zirconium(IV) oxide-yttria stabilized sputtering target, diam. × thickness 2.00?in. × 0.25?in., 99.9% trace metals basis |
114168-16-0 |
1ea |
¥126000 |
2021-03-23 |
購入 |
Yttria stabilized zirconia 化学特性,用途語,生産方法
使用
Solid Oxide Fuel cells operating at temperatures below 800 C (also known as intermediate temperature solid oxide fuel cell, IT-SOFC) are currently the topic of much research and development owing to the high degradation rates and materials costs incurred for SOFC operating at temperatures above 900 C. Thin films of electrode and electrolyte layers is one of the ways to achieve high performances in IT-SOFC. 8 mol% yttria stabilized zirconia sputtering targets can be used to deposit thin films of YSZ layers with high electronic conductivities.
一般的な説明
Yttria-stabilized zirconia (YSZ) is the most commonly used solid electrolyte for solid oxide fuel cells (SOFCs) and oxygen sensors. YSZ exhibits high oxygen-ionic conductivity while blocking electronic conduction. YSZ particles may be synthesized from yttrium nitrate or isopropoxide by sol gel method. YSZ nanoparticles may be prepared in supercritical water (SCW). YSZ nanoparticles of different sizes with varying % mol of yttria may be obtained by CO
2 laser based continuous/pulsed laser vaporization method.
Yttria stabilized zirconia 上流と下流の製品情報
原材料
準備製品
Yttria stabilized zirconia 生産企業
Global( 20)Suppliers
114168-16-0()キーワード:
- 114168-16-0
- Zirconium(IV) oxide-yttria stabilized pellets (for sputtering)
- Zirconium(IV) oxide-yttria stabilized submicron powder, 99.9% trace metals basis (purity excludes ~2% HfO2)
- Yttria stabilized zirconia
- 8YSZ
- Yttrium stabilized zirconium oxide
- Zirconium(IV) oxide-yttria stabilized nanopowder
- Zirconium oxide nanopowder, yttria stabilized, (Zro2 : 86%+)
- Zirconium oxide powder, yttria stabilized (7%)
- Zirconium(IV) oxide, yttria stabilized nanopowder, APS 20-30 nm, 99.9% (cubic)
- Zirconium oxide nanopowder, yttria stabilized (Zro2 : 91%+)
- Zirconium oxide nanopowder, yttria stabilized, (ZrO2 : 94%+)
- Zirconium(IV) oxide, yttria stabilized nanopowder, APS 20-30 nm (cubic)
- Zirconium oxide nanopowder, yttria stabilized
- Yttria Stabilized Zirconia Sputtering Target (8 Mol. %)