INDIUM ARSENIDE
- CAS No.
- 1303-11-3
- Chemical Name:
- INDIUM ARSENIDE
- Synonyms
- indiamarsenide;Indium Arsenic;INDIUM ARSENIDE;indium monoarsenide;indiganylidynearsane;indiumarsenide(inas);Indium arsenide lump;indium(III) arsenide;99.9999%(metalsbasis);Arsinetriylindium(III)
- CBNumber:
- CB7342103
- Molecular Formula:
- AsIn
- Molecular Weight:
- 189.74
- MDL Number:
- MFCD00016144
- MOL File:
- 1303-11-3.mol
- MSDS File:
- SDS
| Melting point | 936°C |
|---|---|
| Density | 5.69 g/cm3 |
| refractive index | 3.51 |
| solubility | insoluble in acid solutions |
| form | 1.5 To 9.5mm Polycrystalline Pieces |
| color | Gray |
| Water Solubility | Insoluble in water. |
| Specific Heat Capacity | Cp(crystal): 0.25 J/(g·K), at 25℃ |
| Crystal Structure | Cubic, Sphalerite Structure - Space Group F(-4)3m |
| Merck | 14,4949 |
| Exposure limits |
ACGIH: TWA 0.01 mg/m3; TWA 0.1 mg/m3 NIOSH: IDLH 5 mg/m3; TWA 0.1 mg/m3; Ceiling 0.002 mg/m3 |
| Knoop Microhardness | 3300, N/mm2 |
| REACH Annex XVII Substances List | Indium arsenide (1303-11-3) |
| EWG's Food Scores | 1 |
| FDA UNII | J1A23S0911 |
| EPA Substance Registry System | Indium arsenide (InAs) (1303-11-3) |
SAFETY
Risk and Safety Statements
| Symbol(GHS) |   GHS06,GHS09 |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Signal word | Danger | |||||||||
| Hazard statements | H301-H331-H400-H410 | |||||||||
| Precautionary statements | P261-P301+P310a-P304+P340-P311a-P405-P501a | |||||||||
| RIDADR | UN1557 | |||||||||
| TSCA | TSCA listed | |||||||||
| HazardClass | 6.1 | |||||||||
| PackingGroup | III | |||||||||
| NFPA 704 |
|
INDIUM ARSENIDE Chemical Properties, Uses, Production
Chemical Properties
Crystals.Insoluble in acids.
Uses
Indium arsenide is used in semiconductor devices.
Uses
Indium arsenide is used in semiconductor electronics, construction of infrared detectors, terahertz radiation source, as it is a strong Photo-dember emitter, superior electron mobility and velocity, in high-power applications detector, diode lasers.
Uses
In semiconductor electronics.
Production Methods
In and As are put into a silica boat at the stoichiometric ratio. The materials are put into a silica
tube together with a small amount of As. The small amount of As is heated to about 300℃ to
eliminate O2 under evacuation followed by sealing off the tube. The boat is zone-refined at the speed of 2 cm/h in the first run and 5 cm/h in the following several runs. The obtained ingot is
pulled out and cut by half to use as a single crystal source. Loading the source into the silica boat
with roughened inner wall, the boat is put into a horizontal silica tube together with a small amount
of As followed by vacuum sealing in the same manner as the first run. A single crystal is obtained
by putting the silica tube into the horizontal Stockbarger furnace with three zones: A (560℃),
B (1000℃) and C (900℃), and by traveling the tube to the direction A→B→C with the speed of
2–5 cm/h. The n-type samples with about 1016 cm-3are grown using this method. The
Czochralski method is also available.
The vapor phase method is available to deposit the thin films. For instance, InAs is grown on the
low temperature area by heating the closed tube loaded with In+AsCl3
together with Cl2
, which
works as a carrier gas. By using this method, we can grow the epitaxial layer.
Hazard
See indium; arsenic.
Structure and conformation
The space lattice of InAs belongs to the cubic system, and its zinc-blend structure has a lattice constant of a=0.6058 nm and the nearest neighbor distance of 0.262 nm.
INDIUM ARSENIDE Preparation Products And Raw materials
| Supplier | Tel | Country | ProdList | Advantage | |
|---|---|---|---|---|---|
| Alfa Aesar | 400-6106006 | saleschina@alfa-asia.com | China | 30103 | 84 |
| Energy Chemical | 400-0056266 | sales8178@energy-chemical.com | China | 44850 | 61 |
| Shanghai Aladdin Bio-Chem Technology Co.,LTD | 400-6206333 13167063860 | anhua.mao@aladdin-e.com | China | 29985 | 65 |
| HBCChem, Inc. | +1-510-219-6317 | sales@hbcchem.com | United States | 10628 | 60 |
| Shanghai YuanYe Biotechnology Co., Ltd. | 15026964105 | 2881489226@qq.com | China | 89667 | 60 |
| Shandong Xiya Chemical Co., Ltd. | 4009903999 13395398332 | sales@xiyashiji.com | China | 20788 | 60 |
| Chengdu Huachun Technology Co., Ltd | 400-1166-196 15982826727 | cdhxsj@163.com | China | 14571 | 60 |
| Zhengzhou Acme Chemical Co., Ltd. | 0371-0371-55629727 13323845623 | 2885676761@qq.com | China | 9957 | 58 |
| Taian Jiaye Biotechnology Co.Ltd | 15318151873;13127280945 | 285424065@qq.com | China | 9961 | 55 |
| Shandong Ono Chemical Co., Ltd. | 0539-6362799 20） | China | 9998 | 58 |
Related articles
- Crystal Structure of ZB (zinc-blende) Indium Arsenide
- Indium arsenide can be used in optical spectroscopy and opto-electronic devices, which is related to its structure. This artic....
- Apr 16,2024
View Latest Price from INDIUM ARSENIDE manufacturers
| Image | Update time | Product | Price | Min. Order | Purity | Supply Ability | Manufacturer | |
|---|---|---|---|---|---|---|---|---|
 |
2025-12-24 | Indium arsenide
1303-11-3
|
1KG | 99.0% | 10000KG | Shaanxi Dideu Medichem Co. Ltd | ||
 |
2019-07-06 | INDIUM ARSENIDE
1303-11-3
|
$1.00 | 50 g | 99.99% | 20kg | Career Henan Chemical Co |
-
- Indium arsenide
1303-11-3
- 99.0%
- Shaanxi Dideu Medichem Co. Ltd
-
- INDIUM ARSENIDE
1303-11-3
- $1.00
- 99.99%
- Career Henan Chemical Co
