5-Bromo-2-nitropyridine

1072-97-5

39856-50-3

General steps for the synthesis of 5-bromo-2-nitropyridine from 2-amino-5-bromopyridine: Add 500L of glacial acetic acid and 150L of acetic acid in a 1000L autoclave, turn on the stirring and circulate the cooling water. When the mixture is homogeneous, slowly add 120 kg of 2-amino-5-bromopyridine and control the temperature at 20℃. After stirring for 30 minutes, 300 kg of peroxyacetic acid was slowly added dropwise. When the dropwise addition to the remaining about 50kg, observed that the temperature began to rise slowly, at this time to suspend the dropwise addition. After the temperature stabilized and stopped rising, the remaining peroxyacetic acid was added dropwise, and the temperature was kept at 30℃ throughout the process. After the dropwise addition was completed, the temperature was raised to 40°C and the reaction was kept at a constant temperature for 20 hours. After the reaction was completed, distillation was carried out under reduced pressure, and the distillation was stopped after about 600 L of acetic acid was evaporated. The remaining liquid was cooled to 25 °C, diluted by adding 500 L of water, and the pH was adjusted with 40% sodium hydroxide solution to 8. Subsequently, the mixture was cooled to -20 °C, filtered and dried to give 125 kg of crude product in 89.3% yield. After recrystallization, 120.5 kg of pure product was obtained in 86.1% yield.