|
|
| | POTASSIUM PEROXYMONOSULFATE Basic information | | Uses |
| | POTASSIUM PEROXYMONOSULFATE Chemical Properties |
| Melting point | >70°C (dec.) | | density | 1.12-1.20 | | storage temp. | Store at room temperature | | solubility | Water (Slightly) | | form | Granular Crystalline Powder | | color | White | | PH | pH:1.4～1.9(50g/l, 25℃) | | Water Solubility | 250 G/L (20 ºC) | | Sensitive | Hygroscopic | | Stability: | Hygroscopic | | InChI | InChI=1S/K.H2O5S.2H2O4S.H/c;1-5-6(2,3)4;2*1-5(2,3)4;/h;1H,(H,2,3,4);2*(H2,1,2,3,4);/p-4 | | InChIKey | LCPQECOVADAKCO-UHFFFAOYSA-J | | SMILES | [KH].S([O-])(=O)(=O)OO.S([O-])([O-])(=O)=O.S(O)([O-])(=O)=O | | CAS DataBase Reference | 37222-66-5(CAS DataBase Reference) | | EPA Substance Registry System | Potassium peroxymonosulfate sulfate (K5[HSO3(O2)]2(HSO4)(SO4)) (37222-66-5) |
| | POTASSIUM PEROXYMONOSULFATE Usage And Synthesis |
| Uses | Manufacture of dry laundry bleaches,
detergent-bleach washing compound, scouring
powders, plastic dishware cleaners, and metal
cleaners; hair-wave neutralizers, pharmaceuticals;
general oxidizing reactions. | | Chemical Properties | Colorless, beautiful crystals; hygroscopic; pure material stable
for a few days, although with slight loss of active oxygen, the rate
of decomposition is catalysed by the impurities formed; vigorous
oxidizing agent. M.p. +45°C with slight decomposition. | | Application | Potassium peroxosulfate is used for bleaching polyamide and cellulose fibers. However, it is ordinarily used only to clean wool and to reduce its shrinkage. | | Synthesis | Potassium persulfate complex salt (oxone) preparation:
(1) making the pill core 1: dissolve the No.1 plasticizer and sodium carboxymethyl cellulose in water to obtain the mixture A, mix potassium bisulfate and the filler, mix with the mixture A sufficiently, and then dry to obtain the pill core 1;
(2) Synthesis of the inner film coat solution: add ethyl cellulose to the organic solvent, heat in a water bath, stir, add No. 2 plasticizer and porosity-inducing agent, and stir until the ethyl cellulose is dissolved, to obtain the inner film coat solution;
(3) Synthesize the outer layer film coat solution: add hydroxypropyl methyl cellulose and potassium persulfate into water, carry out water bath heating, and then add No.3 plasticizer, stir until hydroxypropyl methyl cellulose dissolves, and obtain the outer layer film coat solution;
(4) coating: the drug-carrying pill core 1 is repeatedly immersed into the inner membrane coating solution, removed, and then repeatedly immersed into the outer membrane coating solution, removed, shaken, filtered, and subjected to vacuum drying treatment until constant weight, to obtain a slow-release potassium persulfate preparation.
| | Purification Methods | This is a stable form of Caro's acid and should contain >4.7% of active oxygen. It can be used in EtOH/H2O and EtOH/AcOH/H2O solutions. If active oxygen is too low. it is best to prepare it afresh from 1mole of KHSO5, 0.5mole of KHSO4 and 0.5mole of K2SO4. [Kennedy & Stock J Org Chem 25 1901 1960, Stephenson US Patent 2,802,722 1957.] A rapid preparation of Caro's acid is made by stirring finely powdered potassium persulfate (M 270.3) into ice-cold conc H2SO4 (7mL) and when homogeneous add ice (40-50g). It is stable for several days if kept cold. Keep away from organic matter as it is a STRONG OXIDANT. A detailed preparation of Caro's acid (hypersulfuric acid, H2SO5) in crystalline form m ~45o from H2O2 and chlorosulfonic acid was described by Fehér in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 388 1963. |
| | POTASSIUM PEROXYMONOSULFATE Preparation Products And Raw materials |
|