Physical and Chemical Properties | Back to Contents | 【Solubility in water】
6.3 g/L (25 C) | 【Melting Point】
-68 | 【Boiling Point】
169 | 【Vapor Pressure】
4.8 (25 C) | 【Density】
0.9132 g/cm3 (25 C) | 【Partition Coefficient】
2.06 | 【Heat Of Vaporization】
38.28 kJ/mol | 【Refractive Index】
1.4240 (23<sup>o</sup>C) |
First Aid Measures | Back to Contents | 【Ingestion】
If swallowed, wash out mouth with water provided person is conscious. Call a physician. | 【Inhalation】
If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | 【Skin】
In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | 【Eyes】
In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. |
Hazards Identification | Back to Contents | 【Ingestion】
May be harmful if swallowed. | 【Inhalation】
May be harmful if inhaled. Material may be irritating to mucous membranes and upper respiratory tract. | 【Skin】
May cause skin irritation. May be harmful if absorbed through the skin. | 【Eyes】
May cause irritation. | 【Hazards】
Emits toxic fumes under fire conditions. | 【EC Risk Phrase】
10 | 【EC Safety Phrase】
16 | 【UN (DOT)】
3272 |
Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | 【Respirators】
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. |
Fire Fighting Measures | Back to Contents | 【Flash Point】
46 | 【Fire Fighting】
For small (incipient) fires, use media such as 'alcohol' foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | 【Fire Potential】
Combustible liquid. |
Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Cover with dry-lime, sand, or soda ash. Place in covered containers using non-sparking tools and transport outdoors. Ventilate area and wash spill site after material pickup is complete. |
|
Company Name: |
J & K SCIENTIFIC LTD. |
Tel: |
18210857532 18210857532 |
Fax: |
86-10-82849933 |
WebSite: |
www.jkchemical.com |
Company Name: |
jiliang chemicals |
Tel: |
21-62165282 15801962796; |
Fax: |
021 61153784 |
WebSite: |
http://www.jiliangchem.com |
Company Name: |
Sigma-Aldrich |
Tel: |
021-61415566 800-8193336 |
Fax: |
|
WebSite: |
https://www.sigmaaldrich.cn |
|