环氧脂肪酸甲酯3号
分 子 式 ：C19H36O3物化性质：本产品为淡黄色透明液体，溶于大多数有机溶剂。
产品用途：为使中低端的PVC制品具有良好品质的同时又降低生产成本，我公 司研制开发了环氧甲酯三号产品。可应用于汽车地板、雨衣布、广告布、电线电缆、再生塑胶造粒等制品中。此产品价格低廉，大大降低了PVC制品的生产成本。
产品特点：
1. 环氧值：本产品环氧值为4.2，在同类产品中指标高，但比国内同等质量的产品价格低，是生产普通塑料制品的首选，此产品以天然植物油脂为原料同时具有良好的环保性能，相容性好，挥发性低，对光和热有良好的稳定作用。应用此产品可以增加PVC产品的柔韧性，并提高PVC制品的抗寒耐热的效果。
2. 无异味：公司经过长期技术改进，生产的环氧脂肪酸甲酯3号无任何异味。
3. 颜色：颜色为淡黄色，一般在120左右。
4. 闪点：三号环氧脂肪酸甲酯闪点达到180℃，高于其他同等质量产品的普遍指标170℃。
指 标：Product Index:
Epoxy Fatty Acid Methyl Ester No. 3
Molecular Formula: C19H36O3
Physicochemical Properties：It is a kind of yellowish and transparent liquid, and is soluble in most organic solvent.
Application: To make sure of the good quality and reduce the production cost for the middle and low-end PVC products, we has devoloped Epoxy Fatty Acid Methyl Ester 3, which can be used for the production of car floor, raincoat cloth, advertising cloth, electric wire,cable and recycled plastic granules, etc.. With the lower pricing, it can reduce the production cost of PVC products.
Product Features:
1. Epoxy Value: With the higher epoxy value 4.2 but lower pricing than the other products with the same quality level, our product is the your first choice for manufacturing ordinary plastic products. Our product is made of natural vegetable oil, and has the properties of environmental-protection, good compatibility, low vaporization and good stability to the light and heat. Application of this product can enhance the flexibility and improve the cold/heat-resistant of PVC products.
2. No odor: Through the technological improvements for a long time, now our product epoxy fatty acid methyl ester has not any odor.
3. Color: The color is light yellow, and the APHA is about 120.
4. Flash Point: With the flash point 180 degrees, which is higher than the flash point 170 degrees of the other products with the same quality level.