Chemical Safety Data Sheet MSDS / SDS
Glutaraldehyde
Revision Date:2026-03-21Revision Number:1
Product identifier
- Product name: Glutaraldehyde
- CBnumber: CB3762723
- CAS: 111-30-8
- EINECS Number: 203-856-5
- Synonyms: glutaraldehydesolution ;GDA
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
Company Identification
- Company: Chemicalbook
- Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
- Telephone: 010-86108875
GHS Label elements, including precautionary statements
-
Symbol(GHS)
- Signal wordDanger
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
Hazard statements
H411 Toxic to aquatic life with long lasting effects
H335 May cause respiratory irritation
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
H317 May cause an allergic skin reaction
H314 Causes severe skin burns and eye damage
H312 Harmful in contact with skin
Substance
- Product name: Glutaraldehyde
- Synonyms: glutaraldehydesolution ;GDA
- CAS: 111-30-8
- EC number: 203-856-5
- MF: C5H8O2
- MW: 100.12
General advice
First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance.
If inhaled
After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
In case of eye contact
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
If swallowed
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11
Protection of first-aiders
For personal protection see section 8.
Notes to physician
No data available
Suitable extinguishing media
Water Foam Carbon dioxide (CO2) Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
Specific hazards during fire fighting
Mixture with combustible ingredients. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire.
Hazardous combustion products
Carbon oxides
Specific extinguishing methods
Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Special protective equipment for fire-fighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
NFPA 704
3
0
0
| HEALTH | 3 | Short exposure could cause serious temporary or moderate residual injury (e.g. liquid hydrogen, sulfuric acid, calcium hypochlorite, hexafluorosilicic acid) | |
| FIRE | 0 | Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. Materials that will not burn in air when exposed to a temperature of 820 °C (1,500 °F) for a period of 5 minutes.(e.g. Carbon tetrachloride) | |
| REACT | 0 | Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2) | |
| SPEC. HAZ. |
Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material . Dispose of properly. Clean up affected area.
Handling
Advice on protection against fire and explosionKeep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.
Advice on safe handling
Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Avoidance of contact
Strong acids Strong bases Strong oxidizing agents
Storage
Further information on storage conditionsTightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons.
Storage class
6.1A, Combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials
Further information on storage stability
Handle and store under inert gas.
Packaging material
Suitable material: Poly Drum, Amber Glass Bottle/Jar, LDPE Bottle/Jar
control parameter
Hazard composition and occupational exposure limitsDoes not contain substances with occupational exposure limits.
Personal protective equipment
Respiratory protectionrequired when vapours/aerosols are generated.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Filter type ABEK
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Eye/face protection
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Tightly fitting safety goggles
Skin and body protection
Tightly fitting safety goggles
protective clothing
Hand protection
Material
Nitrile rubber
Break through time
480 min
Glove thickness
0.11 mm
Protective index
Full contact
Manufacturer
(KCL 740 / Aldrich Z677272, Size M)
Material
Nitrile rubber
Break through time
480 min
Glove thickness
0.11 mm
Protective index
Splash contact
Manufacturer
(KCL 740 / Aldrich Z677272, Size M)
Manufacturer
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374
Remarks
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Hygiene measures
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Information on basic physicochemical properties
- Flash point100°C
- Physical stateSolution
- SolubilityChloroform (Slightly), DMSO (Slightly), Ethyl Acetate (Slightly), Methanol (Slightly)
- Odorpungent aldehyde odor
- Colorcolorless
- Appearanceliquid, clear
- Molecular weight100.12 g/mol
- Oxidizing propertiesnone
- Explosive propertiesNot classified as explosive.
- Flow timeNo data available
- Viscosity, kinematicNo data available
- Viscosity, dynamicNo data available
- Decomposition temperatureNo data available
- Autoignition temperatureNo data available
- Partition coefficient: n-octanol/waterNo data available
- Water solubilitysoluble
- Density1.106 g/mL (25 °C)
- Relative density1.058 g/mL at 20 °C
- Relative vapor density3.46
- Vapor pressure20 hPa (20 °C)
- Burning rateNo data available
- Flammability (solid, gas)No data available
- Evaporation rateNo data available
- Boiling point/boiling range101 °C (1,013 hPa) Flash point: No data available
- Melting point/ range-21 °C
- pH3 - 4.5 (25 °C)
Reactivity
Forms explosive mixtures with air on intense heating.
Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
Possibility of hazardous reactions
Violent reactions possible with: The generally known reaction partners of water.
Conditions to avoid
Strong heating.
Incompatible materials
Strong acids Strong bases Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5
11.1 Information on toxicological effects
Mixture Acute toxicityOral: No data available
Acute toxicity estimate Oral - 400 mg/kg (Calculation method)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
Acute toxicity estimate Inhalation - 4 h - 0.56 mg/l - dust/mist(Calculation meth- od)
Symptoms: Possible symptoms:, mucosal irritations, Cough, Shortness of breath,
Possible damages:, damage of respiratory tract
Dermal: No data available
Skin corrosion/irritation
Acute toxicity estimate Oral - 400 mg/kg (Calculation method)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
Acute toxicity estimate Inhalation - 4 h - 0.56 mg/l - dust/mist(Calculation meth- od)
Symptoms: Possible symptoms:, mucosal irritations, Cough, Shortness of breath,
Possible damages:, damage of respiratory tract
Dermal: No data available
Remarks: No data available
Remarks: Mixture causes burns.
Serious eye damage/eye irritation
Remarks: Mixture causes burns.
Remarks: No data available
Remarks: Mixture causes serious eye damage.
Risk of blindness!
Respiratory or skin sensitization
Remarks: Mixture causes serious eye damage.
Risk of blindness!
Mixture may cause allergy or asthma symptoms or breathing difficulties if inhaled.
Mixture may cause an allergic skin reaction.
Germ cell mutagenicity
Mixture may cause an allergic skin reaction.
Classified based on available data. For more details, see section 2
Carcinogenicity
Classified based on available data. For more details, see section 2
Reproductive toxicity
Classified based on available data. For more details, see section 2
Specific target organ toxicity - single exposure
Remarks: No data available
Mixture may cause respiratory irritation.
Specific target organ toxicity - repeated exposure
Mixture may cause respiratory irritation.
Classified based on available data. For more details, see section 2
Aspiration hazard
Classified based on available data. For more details, see section 2
11.2 Additional Information
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache,
Nausea, Vomiting
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Other dangerous properties can not be excluded.
Handle in accordance with good industrial hygiene and safety practice.
Components Glutaraldehyde
Nausea, Vomiting
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Other dangerous properties can not be excluded.
Handle in accordance with good industrial hygiene and safety practice.
Acute toxicity
LD50 Oral - Rat - male and female - 200 mg/kg (US-EPA)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
LC50 Inhalation - Rat - male and female - 4 h - 0.28 mg/l - dust/mist (OECD Test Guideline 403)
LD50 Dermal - Rabbit - male and female - > 1,000 mg/kg (US-EPA)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
LC50 Inhalation - Rat - male and female - 4 h - 0.28 mg/l - dust/mist (OECD Test Guideline 403)
LD50 Dermal - Rabbit - male and female - > 1,000 mg/kg (US-EPA)
Skin corrosion/irritation
Skin - Rabbit
Result: Corrosive - 4 h (OECD Test Guideline 404)
Remarks: (50% solution)
Remarks: (Regulation (EC) No 1272/2008, Annex VI)
Result: Corrosive - 4 h (OECD Test Guideline 404)
Remarks: (50% solution)
Remarks: (Regulation (EC) No 1272/2008, Annex VI)
Serious eye damage/eye irritation
Eyes - Rabbit
Result: Irreversible effects on the eye (Draize Test)
Remarks: (50% solution)
Remarks: Causes serious eye damage.
Result: Irreversible effects on the eye (Draize Test)
Remarks: (50% solution)
Remarks: Causes serious eye damage.
Respiratory or skin sensitization
May cause allergic respiratory and skin reactions Chronic exposure may cause dermatitis. largely based on human evidence
Germ cell mutagenicity
Test Type: Mutagenicity (mammal cell test): chromosome aberration.
Test system: Chinese hamster lung cells
Result: positive
Remarks: (50% solution)
Method: OECD Test Guideline 486
Species: Rat - male - Liver cells
Result: negative
Remarks: (50% solution)
Carcinogenicity
Test system: Chinese hamster lung cells
Result: positive
Remarks: (50% solution)
Method: OECD Test Guideline 486
Species: Rat - male - Liver cells
Result: negative
Remarks: (50% solution)
This product is or contains a component that is not classifiable as to its car- cinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
Reproductive toxicity
Classified based on available data. For more details, see section 2
Specific target organ toxicity - single exposure
May cause respiratory irritation. - Respiratory system
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Acute oral toxicity - If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
Specific target organ toxicity - repeated exposure
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Acute oral toxicity - If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
Classified based on available data. For more details, see section 2
Aspiration hazard
Classified based on available data. For more details, see section 2
Ecotoxicity
Toxicity to fishRemarks: No data available
Components:
Glutaraldehyde:
Toxicity to fishLC50 (Oncorhynchus mykiss (rainbow trout)): 0.8 mg/l End point: mortality Exposure time: 96 h Test Type: static test Method: US-EPA
Toxicity to daphnia and other aquatic invertebrates
LC50: 3 mg/l End point: mortality Exposure time: 48 h Test Type: static test Analytical monitoring: yes GLP: yes
Toxicity to algae/aquatic plants
ErC50 (Desmodesmus subspicatus (green algae)): 0.6 mg/l Exposure time: 72 h Test Type: static test Analytical monitoring: yes Method: OECD Test Guideline 201 GLP: yes
M-Factor (Acute aquatic toxicity)
1
Toxicity to microorganisms
EC50 (activated sludge): 80 mg/l Exposure time: 0.5 h Test Type: static test Method: OECD Test Guideline 209 GLP: yes
Ecotoxicology Assessment
Chronic aquatic toxicityToxic to aquatic life with long lasting effects.
Persistence and degradability
BiodegradabilityRemarks: No data available
Components:
Glutaraldehyde:
Biodegradabilityaerobic Inoculum: activated sludge Concentration: 32 mg/l Result: Biodegradable in sea water Biodegradation: 90 - 100 % Exposure time: 70 d Method: OECD Test Guideline 306 GLP: yes
Biochemical Oxygen Demand (BOD)
235 mg/g Incubation time: 5 d Remarks: (IUCLID)
Chemical Oxygen Demand (COD)
1,385 mg/g Remarks: (IUCLID)
BOD/COD
BOD/COD: 0.17 %
Bioaccumulative potential
BioaccumulationRemarks: No data available
Components:
Glutaraldehyde:
Partition coefficient: noctanol/waterlog Pow: -0.36 (23 °C) Method: OECD Test Guideline 107 GLP: yes Remarks: (50% solution) Bioaccumulation is not expected.
Mobility in soil
Stability in soilRemarks: No data available
Other adverse effects
Components:
Glutaraldehyde:
Additional ecological informationBiological effects: Bactericidal effect. Forms toxic mixtures in water, dilution measures notwithstanding. When discharged properly, no impairments in the function of adapted biological wastewater treatment plants are to be expected. Discharge into the environment must be avoided.
Disposal methods
Waste from residuesOffer surplus and non-recyclable solutions to a licensed disposal company.
International Regulations
IATA-DGR
UN/ID No. : UN 2922
Proper shipping name : Corrosive liquid, toxic, n.o.s.
(Glutaraldehyde)
Class : 8
Subsidiary risk : 6.1
Packing group : II
Labels : Class 8 - Corrosive substances, Division 6.1 - Toxic substances
Packing instruction (cargo aircraft) : 855
Packing instruction (passenger aircraft) : 851
Proper shipping name : Corrosive liquid, toxic, n.o.s.
(Glutaraldehyde)
Class : 8
Subsidiary risk : 6.1
Packing group : II
Labels : Class 8 - Corrosive substances, Division 6.1 - Toxic substances
Packing instruction (cargo aircraft) : 855
Packing instruction (passenger aircraft) : 851
IMDG-Code
UN number : UN 2922
Proper shipping name : CORROSIVE LIQUID, TOXIC, N.O.S.
(Glutaraldehyde)
Class : 8
Subsidiary risk : 6.1
Packing group : II
Labels : 8 (6.1)
EmS Code : F-A, S-B
Marine pollutant : yes
Proper shipping name : CORROSIVE LIQUID, TOXIC, N.O.S.
(Glutaraldehyde)
Class : 8
Subsidiary risk : 6.1
Packing group : II
Labels : 8 (6.1)
EmS Code : F-A, S-B
Marine pollutant : yes
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Domestic regulation GB 6944/12268
UN number : UN 2922
Proper shipping name : CORROSIVE LIQUID, TOXIC, N.O.S.
(Glutaraldehyde)
Class : 8
Subsidiary risk : 6.1
Packing group : II
Labels : 8 (6.1)
Domestic regulation GB 6944/12268
UN number : UN 2922
Proper shipping name : CORROSIVE LIQUID, TOXIC, N.O.S.
(Glutaraldehyde)
Class : 8
Subsidiary risk : 6.1
Packing group : II
Labels : 8 (6.1)
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based upon the properties of the unpackaged material as it is described within this Safety Data Sheet. Transportation classifications may vary by mode of transportation, package sizes, and variations in regional or country regulations.
National regulatory information
Law on the Prevention and Control of Occupational Diseases
Regulations on Safety Management of Hazardous Chemicals
Catalogue of Hazardous Chemicals
applicable
Identification of Major Hazard Installations for Hazardous Chemicals (GB 18218)
Not listed
Hazardous Chemicals for Priority Management
Not listed under SAWS
Regulations on Occupational Labor Protection in the at workplaces where
Toxic Substances Are Used
Catalogue of Highly Toxic Chemicals
Not listed
Regulation of Environmental Management on the First Import of Chemicals and the Import and Export of Toxic Chemicals
China Severely Restricted Toxic Chemicals for Import and Export
Not listed
Regulation on the Administration of Precursor Chemicals
Catalogue and Classification of Precursor Chemicals
Not listed
Full text of other abbreviations
ACGIHUSA. ACGIH Threshold Limit Values (TLV)
ACGIH / C AIIC - Australian Invent Transport by Land of Bra bw - Body weight; CMR Standard of the German List (Canada); ECx - Conc associated with x% respo Chemical Substances (Jap response; ERG - Emerge GLP - Good Laboratory P cer; IATA - International Construction and Equipm Half maximal inhibitory c tion; IECSC - Inventory o tional Maritime Dangerou Industrial Safety and H Standardization; KECI - K tration to 50 % of a test (Median Lethal Dose); MA lution from Ships; n.o.s. No Observed (Adverse) E fect Level; NOELR - No Norm; NTP - National Toxi icals; OECD - Organizatio fice of Chemical Safety a and Toxic substance; PIC stances; (Q)SAR - (Quant (EC) No 1907/2006 of th Registration, Evaluation, Accelerating Decompositi Chemical Substance Inve Thailand Existing Chemica States); UN - United Nat Transport of Dangerous WHMIS - Workplace Hazar
Ceiling limit ry of Industrial Chemicals
ANTT - National Agency for il
ASTM - American Society for the Testing of Materials
- Carcinogen, Mutagen or Reproductive Toxicant
DIN nstitute for Standardisation
DSL - Domestic Substances ntration associated with x% response
ELx - Loading rate se
EmS - Emergency Schedule
ENCS - Existing and New n)
ErCx - Concentration associated with x% growth rate cy Response Guide
GHS - Globally Harmonized System
actice
IARC - International Agency for Research on Canir Transport Association
IBC - International Code for the nt of Ships carrying Dangerous Chemicals in Bulk
IC50 - ncentration
ICAO - International Civil Aviation Organiza- Existing Chemical Substances in China
IMDG - Interna- Goods
IMO - International Maritime Organization
ISHL alth Law (Japan)
ISO - International Organisation for rea Existing Chemicals Inventory
LC50 - Lethal Concenopulation
LD50 - Lethal Dose to 50% of a test population POL - International Convention for the Prevention of Pol- Not Otherwise Specified
Nch - Chilean Norm
NO(A)EC fect Concentration
NO(A)EL - No Observed (Adverse) Efbservable Effect Loading Rate
NOM - Official Mexican ology Program
NZIoC - New Zealand Inventory of Chemfor Economic Co-operation and Development
OPPTS - Ofd Pollution Prevention
PBT - Persistent, Bioaccumulative S - Philippines Inventory of Chemicals and Chemical Subtative) Structure Activity Relationship
REACH - Regulation European Parliament and of the Council concerning the uthorisation and Restriction of Chemicals
SADT - Selfn Temperature
SDS - Safety Data Sheet
TCSI - Taiwan tory
TDG - Transportation of Dangerous Goods
TECI s Inventory
TSCA - Toxic Substances Control Act (United ons
UNRTDG - United Nations Recommendations on the oods
vPvB - Very Persistent and Very Bioaccumulative
ous Materials Information System
ANTT - National Agency for il
ASTM - American Society for the Testing of Materials
- Carcinogen, Mutagen or Reproductive Toxicant
DIN nstitute for Standardisation
DSL - Domestic Substances ntration associated with x% response
ELx - Loading rate se
EmS - Emergency Schedule
ENCS - Existing and New n)
ErCx - Concentration associated with x% growth rate cy Response Guide
GHS - Globally Harmonized System
actice
IARC - International Agency for Research on Canir Transport Association
IBC - International Code for the nt of Ships carrying Dangerous Chemicals in Bulk
IC50 - ncentration
ICAO - International Civil Aviation Organiza- Existing Chemical Substances in China
IMDG - Interna- Goods
IMO - International Maritime Organization
ISHL alth Law (Japan)
ISO - International Organisation for rea Existing Chemicals Inventory
LC50 - Lethal Concenopulation
LD50 - Lethal Dose to 50% of a test population POL - International Convention for the Prevention of Pol- Not Otherwise Specified
Nch - Chilean Norm
NO(A)EC fect Concentration
NO(A)EL - No Observed (Adverse) Efbservable Effect Loading Rate
NOM - Official Mexican ology Program
NZIoC - New Zealand Inventory of Chemfor Economic Co-operation and Development
OPPTS - Ofd Pollution Prevention
PBT - Persistent, Bioaccumulative S - Philippines Inventory of Chemicals and Chemical Subtative) Structure Activity Relationship
REACH - Regulation European Parliament and of the Council concerning the uthorisation and Restriction of Chemicals
SADT - Selfn Temperature
SDS - Safety Data Sheet
TCSI - Taiwan tory
TDG - Transportation of Dangerous Goods
TECI s Inventory
TSCA - Toxic Substances Control Act (United ons
UNRTDG - United Nations Recommendations on the oods
vPvB - Very Persistent and Very Bioaccumulative
ous Materials Information System
Disclaimer:
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.
Recommended Products
2-ACETYL-1,3-CYCLOHEXANEDIONE SDS
Cyclopentane-1,1-diacetic acid SDS
2-Methyl-1,3-cyclohexanedione SDS
GLUTARYL DICHLORIDE SDS
4-CARBETHOXY-3-METHYL-2-CYCLOHEXEN-1-ONE SDS
Methyl 4-(chloroformyl)butyrate SDS
3-Methyl-1,2-cyclopentanedione SDS
1,1-Cyclohexanediacetic acid SDS
1,3-Cyclohexanedione SDS
3-METHYLENECYCLOPROPANE-TRANS-1,2-DICARBOXYLIC ACID SDS