| Identification | More | [Name]
SODIUM ACETYLIDE | [CAS]
1066-26-8 | [Synonyms]
ETHYNYLSODIUM
SODIUM ACETYLIDE
Sodium acetylide suspension
SODIUM ACETYLIDE, 18 WT. % SLURRY IN XYL ENE/LIGHT MINERAL OIL, 95%
SODIUM ACETYLIDE SUSPENSION, ~12% IN XYLENE
SODIUM ACETYLIDE 18% SLURRY IN XYLENE/OIL
Sodium acetylide, 18 wt% slurry in xylene
SODIUM ACETYLIDE 20% W/W SLURRY IN XYLENE/OIL 85:15
Sodiumacetylide(18%suspensioninxylene)
Sodium acetylide (Na(C2H))
SODIUM ACETYLIDE: CA. 18% SLURRY IN XYLENE
Sodium acetylide 18% Suspension
Sodium acetylide, 95%, 17.3% wt min in xylene/mineral oil
sodium hydrogen acetylide
Monosodium acetyide
Sodioethyne | [EINECS(EC#)]
213-908-9 | [Molecular Formula]
C2HNa | [MDL Number]
MFCD00008568 | [Molecular Weight]
48.02 | [MOL File]
1066-26-8.mol |
| Safety Data | Back Directory | [Hazard Codes ]
F,Xn | [Risk Statements ]
R10:Flammable.
R15:Contact with water liberates extremely flammable gases.
R20/21:Harmful by inhalation and in contact with skin .
R38:Irritating to the skin. | [Safety Statements ]
S36/37:Wear suitable protective clothing and gloves .
S43:In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases the risk add-Never use water) . | [RIDADR ]
UN 3399 4.3/PG 1
| [WGK Germany ]
3
| [TSCA ]
Yes | [HazardClass ]
4.3 | [PackingGroup ]
II | [HS Code ]
29310099 |
| Hazard Information | Back Directory | [Description]
Sodium acetylide is an unstable powder, a salt of acetylene. It is a severe explosion risk when shocked or heated. It is used in the manufacture of detonators. | [Chemical Properties]
brown slurry | [Uses]
Sodium acetylide suspension has been used in the preparation of:
2-ethynyladamantan-2-ol1
apical-equatorial (ae) isomer of (Et4N)3[1-(2′-B10H9)-2-NH3B10H8]2
trimethylsilylacetylene3
| [Uses]
Sodium Acetylide Suspension is a reagent used in the synthesis of rhodium(I) amidinate complexes. | [Definition]
ChEBI: The salt formed from the acetylide monoanion and a single sodium cation. | [Purification Methods]
It sometimes contains diluents, e.g. xylene, butyl ether or dioxane which can be removed by filtration followed by a vacuum at 65-60o/5mm. Alternatively the acetylide is purged with HCCH at 100-125o to remove diluent. NaC2H adsorbs 2.2x, 2.0x and 1.6x its wt of xylene, butyl ether and dioxane, respectively. Powdered NaC2H is yellow or yellow-gray in colour and is relatively stable. It can be heated to ca 300o in the absence of air. Although no explosion or evolution of gas occurs, it turns brown due to disproportionation. At 170-190o in air it ignites slowly and burns smoothly. At 215-235o in air it “flash-ignites” and burns quickly. It can be dropped into a slight excess of H2O without flashing or burning, but vigorous evolution of HC CH (HIGHLY FLAMMABLE IN AIR) occurs. The sample had been stored in the absence of air for one year without deterioration. Due to the high flammability of HCCH, the salt should be stored dry and should be treated with care. After long storage, NaCCH can be redissolved in liquid NH3 and used for the same purposes as the fresh material. However it may be slightly turbid due to the presence of moisture. [Rutledge J Org Chem 22 649 1957, Greenlee & Henne J Am Chem Soc 77 5013 1955, Campbell & Campbell Inorg Synth II 76, 81 1946, Org Synth 30 15 1950, Beilstein 1 H 238.] It is available commercially under N2 in Sure/Seal bottles as an 18 wt% solution in xylene/mineral oil. See “Aliphatic Compounds”, Chapter 4, for its prepartion. |
|
| Company Name: |
Alfa Aesar
|
| Tel: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Tel: |
021-021-58432009 400-005-6266 |
| Website: |
http://www.energy-chemical.com |
|