| Identification | More | [Name]
TRI-O-CRESYL PHOSPHATE | [CAS]
78-30-8 | [Synonyms]
O-TOLYL PHOSPHATE
PHOSPHORIC ACID TRI-O-CRESYL ESTER
PHOSPHORIC ACID TRI-O-TOLYL ESTER
TRI-O-CRESYL PHOSPHATE
TRI-O-TOLYL PHOSPHATE
NCLC61041
o-Cresyl phosphate
o-cresylphosphate
o-Trikesylphosphate
o-trikresylphosphate
o-Trioyl phosphate
Phosflex 179C
phosflex179c
phosphatedetri-o-cresyle
Phosphoric acid, tri-2-methylphenyl ester
Phosphoric acid, tri-o-cresyl ether
Phosphoric acid, tris(2-methylphenyl) ester
phosphoricacid,tri(2-tolyl)ester
Phosphoricacid,tris(2-methylphenyl)ester
phosphoricacidtri(2-methylphenyl)ester | [EINECS(EC#)]
201-103-5 | [Molecular Formula]
C21H21O4P | [MDL Number]
MFCD00041906 | [Molecular Weight]
368.36 | [MOL File]
78-30-8.mol |
| Chemical Properties | Back Directory | [Appearance]
Tricresyl phosphates are available as the
o-isomer (TOCP), the m-isomer (TMCP), and p-isomer
(TPCP). The ortho-isomer is the most toxic of the three;
the meta-and para-isomers are relatively inactive. The
commercial product may contain the ortho-isomer as a
contaminant unless special precautions are taken during
manufacture. Pure tri-para-cresyl phosphate is a solid, and
ortho-and meta-are liquids (see below). The tri-o-cresyl
phosphate will be discussed here as the specific example of
these compounds because it is the most toxic of the tricresyl
phosphates and specifically regulated by OSHA. TOCP
is a colorless to pale yellow, odorless liquid or solid (below
52/F/11℃). | [Melting point ]
-25 °C
| [Boiling point ]
410 °C
| [density ]
1.2
| [vapor pressure ]
0.195 at 50 °C (Carré and Bertrans, 1998) | [refractive index ]
1.558-1.561
| [Fp ]
225 °C
| [storage temp. ]
Inert atmosphere,2-8°C | [solubility ]
sparingly soluble in water; soluble in acetic acid; freely soluble in
alcohol, benzene, ether; very soluble in carbon tetrachloride, toluene.
maximum allowable concentration: 0.1 mg/m3 (TLV-TWA) (ACGIH 1986) | [form ]
Viscous Liquid | [color ]
Clear colorless to yellow | [Merck ]
9764 | [Exposure limits]
TLV-TWA skin 0.1 mg/m3 (ACGIH and OSHA); IDLH 40 mg/m3 (NIOSH). | [CAS DataBase Reference]
78-30-8(CAS DataBase Reference) | [EPA Substance Registry System]
Tri-o-cresyl phosphate (78-30-8) |
| Safety Data | Back Directory | [Hazard Codes ]
N-T,N,T | [Risk Statements ]
R51/53:Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed . | [Safety Statements ]
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S20/21:When using, do not eat, drink or smoke .
S28:After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer) . | [RIDADR ]
3082 | [RTECS ]
TD0350000 | [HazardClass ]
6.1(a) | [PackingGroup ]
II | [HS Code ]
29199000 | [Safety Profile]
Poison by
subcutaneous, intramuscular, intravenous,
and intraperitoneal routes. Moderately toxic
by ingestion. Most of the cases of tri-o-cresyl
phosphate poisoning have followed
its ingestion. In 1930, some 15,000 persons
were affected in the United States, and of
these, 10 died. The responsible material was
found to be an alcoholic drink known as
Jamaica ginger, or "jake." This beverage had
been adulterated with about 2% of tri-o-cresyl
phosphate. The affected persons
developed a polyneuritis, which progressed,
in many cases, with degeneration of the
peripheral motor nerves, the anterior horn
cells, and the pyramidal tracts. Sensory
changes were absent. Since 1930 there have
been several other outbreaks of poisoning
following ingestion of the material. Tri-ocresyl
phosphate is more toxic than the mform,
and much more so than tri-p-cresyl
phosphate or triphenyl phosphate.
Experimental reproductive effects.
flame. Can react with oxidizing materials. To
fight fire, use CO2, dry chemical. When
heated to decomposition it emits highly
toxic fumes of POx. See also
PHOSPHATES.
Combustible when exposed to heat or | [Hazardous Substances Data]
78-30-8(Hazardous Substances Data) | [Toxicity]
Acute oral LD50 for rats 160 mg/kg (quoted, RTECS, 1985). | [IDLA]
40 mg/m3 |
| Hazard Information | Back Directory | [Potential Exposure]
Tricresyl phosphate is used as an additive
in hydraulic fluids; as a plasticizer; pigment dispersant;
flame retardant; as a plasticizer for chlorinated
rubber; vinyl plastics; polystyrene, polyacrylic, and polymethacrylic
esters; as an adjuvant in milling of pigment
pastes; as a solvent and as a binder in nitrocellulose and
various natural resins, and as an additive to synthetic lubricants
and gasoline. It is also used in the recovery of phenol
in coke-oven wastewaters. | [First aid]
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids. Seek
medical attention immediately. If this chemical contacts the
skin, remove contaminated clothing and wash immediately
with soap and water. Speed in removing material from skin
is of extreme importance. Shampoo hair promptly if
contaminated. Seek medical attention immediately. If this
chemical has been inhaled, remove from exposure, begin rescue
breathing (using universal precautions, including resuscitation
mask) if breathing has stopped and CPR if heart action
has stopped. Transfer promptly to a medical facility. When
this chemical has been swallowed, get medical attention.
Give large quantities of water and induce vomiting. Do not
make an unconscious person vomit. Effects may be delayed.
Medical observation is recommended. | [Shipping]
UN2574 Tricresyl phosphate with >3% ortho
(o-) isomer, Hazard Class: 6.1; Labels: 6.1-Poisonous
materials. | [Incompatibilities]
Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions.
Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides. Contact with magnesium
may cause explosion. Organophosphates, such as tricresyl
phosphate, are susceptible to formation of highly toxic and
flammable phosphine gas in the presence of strong reducing
agents such as hydrideds and active metals. Partial oxidation
by oxidizing agents may result in the release of
toxic phosphorus oxides. | [Chemical Properties]
Tricresyl phosphates are available as the
o-isomer (TOCP), the m-isomer (TMCP), and p-isomer
(TPCP). The ortho-isomer is the most toxic of the three;
the meta-and para-isomers are relatively inactive. The
commercial product may contain the ortho-isomer as a
contaminant unless special precautions are taken during
manufacture. Pure tri-para-cresyl phosphate is a solid, and
ortho-and meta-are liquids (see below). The tri-o-cresyl
phosphate will be discussed here as the specific example of
these compounds because it is the most toxic of the tricresyl
phosphates and specifically regulated by OSHA. TOCP
is a colorless to pale yellow, odorless liquid or solid (below
52/F/11℃). | [Physical properties]
Tri-o-cresyl phosphate is a colorless to pale yellow, odorless to faint aromatic-like liquid, and it is a solid below the 25.6 °C melting point. It is sparingly soluble in water, but is slightly soluble in ethanol and very soluble in ethyl ether (Budavari, 1996). The vapor pressure of TOCP is 0.00002mm Hg at room temperature, but is 10mm Hg at 265 °C (Bisesi, 1994). It decomposes slightly upon boiling (bp 410 °C) (Budavari, 1996). | [Uses]
As plasticizer in lacquers and varnishes. | [Uses]
TOCP finds wide applications in several areas. It is used as a flame retardant; as a plasticizer; as a waterproofing agent; as a synthetic lubricant; as an additive in gasoline to control preignition; and in hot extrusion molding, hydraulic fluid, and solvent mixture for resins.. | [Uses]
Tri-o-cresyl phosphate is used widely as a gasoline additive,
plasticizer, fire retardant, solvent, extreme pressure
additive, intermediate in pharmaceutical manufacturing,
water-proofing agent, heat exchange medium, and as a
lead scavenger in gasoline. | [Production Methods]
Prepared from cresol and phosphorus oxychloride, phosphoric acid, or phosphorus
pentachloride. The grades of cresol commonly used are the isomeric (o-, m-, /p-),
and meta-para mixtures from coal tar and cresylic acid from petroleum. Purification
of the product is based on the intended use; the commercial product is
generally obtained as a mixture. A 'refined grade' of tricresyl phosphate is
prepared by vacuum distillation, or alternatively by washing with 2% NaOH and
water (Lowenheim and Moran 1975). | [Hazard]
Toxic by ingestion and skin absorption. The
oisomer is highly toxic. TLV: 0.1 mg/m3 (skin);
not classifiable as a Human Carcinogen. | [Health Hazard]
Non-industrial:
During the prohibition era in the United States in the 1920s and 1930s, Jamaican
ginger extract was used as an additive to beverages for popular consumption. An
outbreak of polyneuritis, an estimated 20,000 to 30,000 cases, led to the discovery
that the ginger extract, used because of its alcohol content, was contaminated with
TOCP, leading to the polyneuritis. This syndrome thus came to be known as
'jake', 'ginger jake', and 'jake leg' (Baron 1981; Morgan 1982). The discovery of
the polyneuritis associated with tri-o-cresyl phosphate led to much research on this
compound (Lillie and Smith 1932; Smith and Elvove 1930; Smith and Lillie 1931; Smith et al 1930, 1932) and related materials, particularly the organophosphorus
insecticides, in which polyneuritis was associated with a delayed neuropathy
characterized by degeneration of axons with subsequent secondary degeneration
of myelin (Abou-Donia 1981). Man may very well be the most sensitive species.
The best known and most studied incidences of poisoning by TOCP, therefore,
are associated with the contamination of Jamaican ginger extract with 0.5 to 3%
tri-o-cresyl phosphate during the 1930s in the United States (Abou-Donia 1981;
Baron 1981; Calabrese 1971; Morgan 1982; Morgan and Penovich 1978). However,
other cases of poisoning have been reported in connection with the use of
contaminated cooking oil in Japan (Yuasa et al 1970) and Morocco (Smith and
Spalding 1959), gingili oil in Sri Lanka (Senanayake and Jeyaratnam 1981), and in
other situations as summarized by Morgan (1982).
Industrial:
Cases of poisoning associated with the use of TOCP have been reported in workers
in the shoe industries of Italy (Capellini et al 1968; Cosi et al 1973; Desantis 1979;
Faggi et al 1971) and Spain (Bermejillo 1971a,b). The glues and adhesives used,
apparently contaminated with TOCP, are associated with symptoms characteristic
of TOCP poisoning. However, Morgan (1981) suggests caution in assigning
causation in such situations because of the possibility of the presence of other
chemicals which may cause similar symptomology. | [Health Hazard]
TOCP is a highly poisonous compound. Its toxicity is greater than that of the meta- or para-isomer. The toxic routes are inhalation, ingestion, and absorption through the skin; and the symptoms varied with the species and the route of admission.
Ingestion of 40–60 mL of the liquid can be fatal to humans. An oral dose of 6–7 mg/kg has produced serious paralysis in humans (Patty 1949). The toxic symptoms from oral intake can be gastrointestinal pain, diarrhea, weakness, muscle pain, kidney damage, and paralysis. The target organs are the gastrointestinal tract, kidney, central nervous system, and neuromuscular system.
LD50 value, oral (rabbits): 100 mg/kg
Somkuti et al. (1987) reported testicular toxicity of TOCP in adult leghorn roosters. Birds dosed with 100 mg/kg/day exhibited limb paralysis in 7–10 days. Such symptoms are characteristics of delayed neurotoxicity caused by organophosphorus compounds. Analysis at the termination of 18 days indicated a significant inhibition of neurotoxic esterase activity in both brain and testes, and a decrease in sperm motility and brain acetylcholinesterase activity.
TOCP caused adverse reproductive effects in mice, such as increased maternal mortality and a decreased number of viable litters. An LD50 value of 515 mg/kg/day is reported
(Environmental Health Research and Testing 1987).. | [Fire Hazard]
Noncumbustible solid; vapor pressure 0.02 torr at 150°C (302°F); fire retardant. | [Industrial uses]
1. As additive to extreme pressure lubricants.
2. As a non-flammable fluid in hydraulic systems.
3. As plasticizer in lacquers and varnishes.
4. As plasticizer in vinyl plastics manufacture.
5. As flame retardant.
6. As lead scavenger in gasoline.
7. As solvent for nitrocellulose, in cellulosic molding compositions. | [Environmental Fate]
Biological. A commercial mixture containing tricresyl phosphates was completely degraded by
indigenous microbes in Mississippi River water to carbon dioxide. After 4 wk, 82.1% of the
theoretical carbon dioxide had evolved (Saeger et al., 1979).
Chemical/Physical. Tri-o-cresyl phosphate hydrolyzed rapidly in Lake Ontario water,
presumably to di-o-cresyl phosphate (Howard and Doe, 1979). When an aqueous solution
containing a mixture of isomers (0.1 mg/L) and chlorine (3 to 1,000 mg/L) was stirred in the dark
at 20 °C for 24 h, the benzene ring was substituted with one to three chlorine atoms (Ishikawa and
Baba, 1988).
Decomposes at temperatures greater than 424 °C (Dobry and Keller, 1957). | [Metabolism]
The skin penetrating ability of a series of phosphorus esters, including tri-o-cresyl
phosphate, was studied by Marzulli et al (1965). They found a relationship
between the solubility of the compounds studied in benzene and water, the
molecular weight, and the volatility and their skin-penetrating capacity. Tri-ocresyl
phosphate was one of the least penetrating of the compounds studied in a
series of related phosphorus esters. However, Ahmed and Glees (1971) showed
that the application of 0.2 cm3/kg body weight of tricresyl phosphate daily for 10 d
on the skin of the neck of simian primates produced general symptoms of
intoxication. This observation has been confirmed in mice (Litau 1975).
Following dermal application of tri-o-cresyl phosphate to a preclipped area on
the back of the neck of male cats (Nomeir and Abou-Donia 1984), the compound
reached its maximum concentration in plasma at 12 h, while its metabolites
reached their maximum concentrations between 24 and 48 h. The subsequent
disappearance of TOCP from the plasma followed monoexponential kinetics with
a half-life of 1.2 d. Di-o-cresyl phosphate and o-cresyl phosphate were the major
metabolites in the plasma, while dihydroxymethyl TOCP was present in trace
amounts. Appreciable amounts of saligenin cyclic-o-tolyl phosphate were detected
in the plasma at all time points. TOCP was the predominant compound in the
brain, spinal cord, and sciatic nerve, while the liver, kidneys, and lungs contained
mostly metabolites. The major metabolite identified in these tissues was ohydroxybenzoic
acid, followed by di-o-cresyl phosphate. Di-o-cresyl phosphate
and o-cresyl phosphate were the predominant metabolites in the brain, spinal cord,
and sciatic nerve. Other metabolites identified in the tissues were ocresol,
dihydroxymethyl TOCP, as well as the stepwise oxidation products of the methyl
group of o-cresol.
In chickens, after oral administration of radiolabeled tri-o-cresyl phosphate
(Sharma and Watanabe 1974; Watanabe and Sharma 1973), nerve tissues accumulated
the compound over a period of two weeks. Other tissues examined showed
an increase over a period of 3-7 d, followed by a decline. During that period
the principal metabolite, 2-(2-methylphenoxy)-4H-l,3,2-benzodioxaphosphorin-
2-oxide (CBDP), represented 71 and 74% of the total in the liver at 12 and 24 h.
The concentration of TOCP and metabolites in the plasma at 24 h was only about
5% that of the liver. These workers suggest that CBDP is bound to tissues to a greater extent than TOCP, since low concentrations of the metabolite were found
in plasma; TOCP was the major circulating compound. However, the total
recovery of the administered radiolabeled compound over the first 3 d was
relatively low, emphasizing the extended period of time this chemical remains in
the body. Only 26.5% of the administered dose was excreted in 3 d.
Eto (1969) has reviewed the pathways of metabolism of tri-o-cresyl phosphate. | [Waste Disposal]
TOCP is dissolved in a combustible solvent and burned in a chemical incinerator equipped with an afterburner and scrubber. |
|
|