SELENIUM HEXAFLUORIDE Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSES KOMPRIMIERTES FLüSSIGGAS.
CHEMISCHE GEFAHREN
Zersetzung beim Erhitzen unter Bildung giftiger und ätzender Rauche mit Fluorwasserstoffund Selen.
ARBEITSPLATZGRENZWERTE
TLV: (als Se) 0,05 ppm (als TWA); (ACGIH 2005).
MAK: (als Se) 0,05 mg/m?(Einatembare Fraktion) Spitzenbegrenzung: überschreitungsfaktor II(4); Krebserzeugend Kategorie 3B; Schwangerschaft: Gruppe C; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation.
INHALATIONSGEFAHREN
Eine gesundheitsschädliche Konzentration des Gases in der Luft wird beim Entweichen aus dem Behälter sehr schnell erreicht.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: ätzend. Die Substanz verätzt die Augen und die Atemwege. Inhalation des Gases kann zu Lungenödem führen (s.Anm.). Schnelle Verdampfung kann zu Erfrierungen führen.
LECKAGE
Gefahrenbereich verlassen! Fachmann zu Rate ziehen! Belüftung. Wasserstrahl NIEMALS auf die Flüssigkeit richten. Gasdichter Chemikalienschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät. NICHT in die Umwelt gelangen lassen.
R-Sätze Betriebsanweisung:
R23/25:Giftig beim Einatmen und Verschlucken.
R33:Gefahr kumulativer Wirkungen.
R34:Verursacht Verätzungen.
S-Sätze Betriebsanweisung:
S20/21:Bei der Arbeit nicht essen, trinken,rauchen.
S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Chemische Eigenschaften
Selenium hexafluoride is a nonflammable, colorless gas. Repulsive odor.
Physikalische Eigenschaften
Colorless gas; refractive index 1.895; density 3.25 g/L at -28°C; liquefies at -34.5°C; freezes at -50.8°C; sublimes at -63.8°C; insoluble in water.
Verwenden
Selenium hexafluoride is used as a gaseous electric insulator
(146). It may be prepared by passing gaseous fluorine over
finely divided selenium in a copper vessel. Industrial selenium
exposure is common for makers of arc light electrodes,
electric rectifiers, and semiconductors.
synthetische
Selenium hexafluoride is prepared by passing fluorine gas over finely divided selenium in a copper vessel:
Se + 3F
2 → SeF
6.
Allgemeine Beschreibung
SELENIUM HEXAFLUORIDE is a colorless gas used as a electrical insulator. SELENIUM HEXAFLUORIDE is highly toxic by inhalation. When heated to high temperatures SELENIUM HEXAFLUORIDE may decompose to emit toxic fluoride and selenium fumes. Prolonged exposure of the container to fire or intense heat may cause SELENIUM HEXAFLUORIDE to violently rupture or rocket.
Air & Water Reaktionen
Insoluble in water.
Reaktivität anzeigen
SELENIUM HEXAFLUORIDE is a colorless, poison gas, when heated to decomposition SELENIUM HEXAFLUORIDE emits very toxic fumes containing metallic selenium and selenium fluorides [Lewis, 3rd ed., 1993, p. 1131].
Health Hazard
TOXIC; may be fatal if inhaled, ingested or absorbed through skin. Vapors are extremely irritating and corrosive. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control may cause pollution.
Brandgefahr
Some may burn but none ignite readily. Vapors from liquefied gas are initially heavier than air and spread along ground. Some of these materials may react violently with water. Cylinders exposed to fire may vent and release toxic and/or corrosive gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket.
Sicherheitsprofil
Poison by inhalation. When heated to decomposition it emits very toxic fumes of Fand Se. See also SELENIUM COMPOUNDS and FLUORIDES.
mögliche Exposition
Selenium hexafluoride, a gas, is utilized as a gaseous electric insulator.
Versand/Shipping
Selenium hexafluoride, Hazard Class: 2.3; Labels: 2.3-Poisonous gas, 8-Corrosive material Inhalation, Hazard Zone A. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.
Inkompatibilitäten
Hydrolyzes very slowly in cold water. Decomposes on heating, producing hydrogen fluoride, fluoride, and selenium. Contact with metal or acid will produce toxic gaseous hydrogen selenide.
Waste disposal
Return refillable compressed gas cylinders to supplier. If possible, convert selenium compounds to an insoluble form with SO2 before landfill or solidification.
SELENIUM HEXAFLUORIDE Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte