| Identification | More | [Name]
N-Cyclohexylmaleimide | [CAS]
1631-25-0 | [Synonyms]
1-CYCLOHEXYL-1H-PYRROLE-2,5-DIONE
1-CYCLOHEXYL-PYRROLE-2,5-DIONE
AKOS MSC-0038
ASISCHEM D13289
N-CYCLOHEXYLMALEIC IMIDE
N-CYCLOHEXYLMALEIMIDE
TIMTEC-BB SBB005910
N-Cyclohexylmaleinimide
1-Cyclohexyl-3-pyrroline-2,5-dione | [EINECS(EC#)]
216-630-6 | [Molecular Formula]
C10H13NO2 | [MDL Number]
MFCD00043904 | [Molecular Weight]
179.22 | [MOL File]
1631-25-0.mol |
| Chemical Properties | Back Directory | [Melting point ]
89-91 °C (lit.) | [Boiling point ]
132 °C / 17mmHg | [density ]
1.226±0.06 g/cm3(Predicted) | [vapor pressure ]
80Pa at 25℃ | [storage temp. ]
Inert atmosphere,Room Temperature | [solubility ]
Insoluble in water | [form ]
powder to lump | [pka]
-2.26±0.20(Predicted) | [color ]
White to Almost white | [Water Solubility ]
260mg/L at 25℃ | [InChI]
InChI=1S/C10H13NO2/c12-9-6-7-10(13)11(9)8-4-2-1-3-5-8/h6-8H,1-5H2 | [InChIKey]
BQTPKSBXMONSJI-UHFFFAOYSA-N | [SMILES]
N1(C2CCCCC2)C(=O)C=CC1=O | [LogP]
2.57 at 23℃ | [CAS DataBase Reference]
1631-25-0(CAS DataBase Reference) | [EPA Substance Registry System]
1631-25-0(EPA Substance) |
| Safety Data | Back Directory | [Symbol(GHS) ]
 
GHS06,GHS09 | [Signal word ]
Danger | [Hazard statements ]
H301-H315-H317-H319-H335-H410 | [Precautionary statements ]
P261-P273-P280-P301+P310-P302+P352-P305+P351+P338 | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S37/39:Wear suitable gloves and eye/face protection . | [RIDADR ]
2811 | [WGK Germany ]
3
| [Hazard Note ]
Irritant | [TSCA ]
Yes | [REACH Registrations]
Active | [HazardClass ]
6.1 | [PackingGroup ]
II | [HS Code ]
29251900 | [Storage Class]
6.1C - Combustible acute toxic Cat.3
toxic compounds or compounds which causing chronic effects | [Hazard Classifications]
Acute Tox. 3 Oral
Aquatic Acute 1
Aquatic Chronic 3
Eye Irrit. 2
Skin Irrit. 2
Skin Sens. 1A
STOT SE 3 |
| Hazard Information | Back Directory | [Uses]
N-Cyclohexylmaleimide (CHMI, NCMI) may be used for the preparation of hyperbranched copolymers of p-(chloromethyl)styrene (CMS) and NCMI, via atom transfer radical copolymerization reaction. | [Synthesis Reference(s)]
Synthetic Communications, 20, p. 1607, 1990 DOI: 10.1080/00397919008053079 | [General Description]
N-Cyclohexylmaleimide (CHMI, NCMI) is a cyclic imide. Diels-Alder reactions of 9-hydroxymethylanthracene with CHMI catalyzed by hydrophobic nanospace confined within the self-assembled Pd6 open cage bearing triimidazole walls have been reported. It undergoes Diels-Alder reactions with various aromatic hydrocarbons promoted by self-assembled coordination cage. This cage acts as nanometer-sized molecular flask and hence promotes this reaction. CHMI is reported to undergo radical polymerization readily under various polymerization conditions to afford poly(CHMI), having excellent thermal stability. | [Flammability and Explosibility]
Notclassified | [Synthesis]
1. In a 100 L reactor equipped with a thermometer, water separator, cooler and stirrer, 40 kg of xylene was added as solvent. Subsequently, 2 kg of silica gel as carrier, 2 kg (17.3 mol) o-phosphoric acid, 30 g (0.19 mol) of zinc acetate and 30 g (0.14 mol) of 2,4-dimethyl-6-tert-butylphenol were added sequentially. 200 g (1.96 mol) of triethylamine was added to neutralize the reaction system, followed by the slow addition of 4 kg (43.0 mol) of cyclohexylamine over 5 min to form the amine salt.
2. 4.4kg of maleic anhydride was added to the reactor over 5 minutes. The reaction temperature was maintained at 140°C and the resulting water was removed by azeotropic distillation along with xylene through a water separator. The reaction was maintained at this temperature for 3 hours.
3. After 3 hours of reaction, an additional 200g of maleic anhydride was added and the reaction was continued for another 3 hours. Upon completion of the reaction, the reaction mixture was cooled to 30°C and the catalyst layer was removed by layer separation.
4. The xylene solution layer was transferred to a neutralization tank, 500 g of 5% aqueous sodium carbonate solution was added, stirred for 20 minutes and then allowed to stand for 20 minutes to stratify the solution. Separate and discard the aqueous layer.
5. Add 500g of water to the organic layer, stir for 20 minutes and leave for 20 minutes, separate again and discard the aqueous layer.
6. The purified organic layer was transferred to a concentration tank and gradually heated under reduced pressure to 50°C, 100°C and finally distilled at 20°C to remove xylene. After complete evaporation of the solvent, 7.1 kg of light white solid product was obtained.
7. The purity of the product N-cyclohexylmaleimide was 98% by liquid chromatography analysis, based on a 97% yield of cyclohexylamine. | [References]
[1] Patent: EP2311804, 2011, A2. Location in patent: Page/Page column 7-8
[2] Patent: US2011/124882, 2011, A1. Location in patent: Page/Page column 5
[3] Patent: JP6273389, 2018, B1. Location in patent: Paragraph 0044-0054
[4] Patent: JP6336192, 2018, B1. Location in patent: Paragraph 0054; 0055; 0057; 0059; 0060; 0061-0066
[5] Molecules, 2018, vol. 23, # 11, |
|
| Company Name: |
J & K SCIENTIFIC LTD.
|
| Telephone: |
18210857532 18210857532 |
| Website: |
https://www.jkchemical.com |
| Company Name: |
Alfa Aesar
|
| Telephone: |
400-6106006 |
| Website: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical
|
| Telephone: |
400-0056266 |
| Website: |
www.energy-chemical.com |
| Company Name: |
China Langchem Inc.
|
| Telephone: |
0086-21-58956006 |
| Website: |
www.chemicalbook.com/ShowSupplierProductsList19141/0_EN.htm |
|