| Identification | More | [Name]
3-ETHYL-3-OXETANEMETHANOL | [CAS]
3047-32-3 | [Synonyms]
2-HYDROXYMETHYL-2-ETHYL-1,3-EPOXYPROPANE
3-ETHYL-3-HYDROXYMETHYLOXETANE
3-ETHYL-3-OXETANEMETHANOL
3-HYDROXYMETHYL-3-ETHYLOXETANE
3-ethyl-3-oxetanemethano
3-Ethyl-3-oxethanemethanol
3-ethyloxetane-3-methanol
Trimethylolpropaneoxetane,TMPO
3-Ethyl-(hydroxymethyl)oxetane
Trimethylolpropane oxetane
(3-Ethyloxetane-3-yl)methanol
3-Ethyloxacyclobutane-3-methanol | [EINECS(EC#)]
221-254-0 | [Molecular Formula]
C6H12O2 | [MDL Number]
MFCD00190143 | [Molecular Weight]
116.16 | [MOL File]
3047-32-3.mol |
| Chemical Properties | Back Directory | [Appearance]
clear colorless liquid | [Boiling point ]
96 °C/4 mmHg (lit.) | [density ]
1.019 g/mL at 25 °C(lit.)
| [vapor pressure ]
3.1Pa at 25℃ | [refractive index ]
n20/D 1.453(lit.)
| [Fp ]
227 °F
| [storage temp. ]
Inert atmosphere,2-8°C | [form ]
Liquid | [pka]
14.58±0.10(Predicted) | [color ]
Clear colorless | [Water Solubility ]
Miscible in water. | [InChI]
InChI=1S/C6H12O2/c1-2-6(3-7)4-8-5-6/h7H,2-5H2,1H3 | [InChIKey]
UNMJLQGKEDTEKJ-UHFFFAOYSA-N | [SMILES]
O1CC(CC)(CO)C1 | [LogP]
0.6 at 25℃ | [CAS DataBase Reference]
3047-32-3(CAS DataBase Reference) | [EPA Substance Registry System]
3047-32-3(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
Xn | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin .
R22:Harmful if swallowed. | [Safety Statements ]
S37/39:Wear suitable gloves and eye/face protection .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . | [WGK Germany ]
3
| [TSCA ]
Yes | [HS Code ]
29329990 |
| Hazard Information | Back Directory | [Chemical Properties]
clear colorless liquid | [Uses]
3-Ethyl-3-oxetanemethanol is used as pharmaceutical intermediate. | [Application]
Poly(3-ethyl-3-oxetanemethanol) could be used as a core to synthesize amphiphilic hyperbranched polyethers (AHPs), which have multiple linear poly-(ethylene glycol) arms. The AHPs owned good dispersion performance for coating pigment particles. Among AHP's products, AHP47 with 0.47 DB had good potential in coating applications. can also be used to synthesize azobenzene-focused hyperbranched poly(3- ethyl-3-oxetanemethanol)[1-2]. | [Synthesis Reference(s)]
Journal of the American Chemical Society, 79, p. 3455, 1957 DOI: 10.1021/ja01570a038 | [Synthesis]
3-Ethyl-3-oxetanemethanol was prepared by a modified procedure described in the literature. A mixture of trimethylopropane (1, 26.8 g, 0.2 mol), diethyl carbonate (23.6 g, 0.2 mol) and potassium hydroxide (0.1 g, 1.8 mmol) in 2 ml absolute ethyl alcohol was refluxed in oil bath at 110?C for 1 h. Then, the mixture was distilled at 110?C for 1 h. Distillation was continued until the temperature of oil bath reached 140?C. After the distillation, the vacuum was supplied for 1 h to remove the excess solvent. On heating above 185?C, the distilled materials were collected in a cold trap under vacuum and obtained >85% of the theoretical yield. 1H-NMR (CDCl3, δ, ppm): 0.80–0.83 (t, 3H, –CH2CH3), 1.61–1.66 (q, 2H, –CH2CH3), 3.62 (s, 2H, –CH2OH), 3.66 (s, 1H, –CH2OH), 4.31–4.32 and 4.38–4.39 (d, 4H, –CH2O). | [References]
[1] Q. Xu. “Synthesis and properties of amphiphilic hyperbranched polyethers as pigment dispersant.” IOP Conference Series: Materials Science and Engineering 216 1 (2018).
[2] Xu, Youqian et al. “Hierarchical self-assembly of protoporphyrin IX-bridged Janus particles into photoresponsive vesicles?.” RSC Advances 37 (2016): 31053–31058. |
|
|