Propan-1,3-diol Chemische Eigenschaften,Einsatz,Produktion Methoden
S-Sätze Betriebsanweisung:
S23:Gas/Rauch/Dampf/Aerosol nicht einatmen(geeignete Bezeichnung(en) vom Hersteller anzugeben).
S24/25:Berührung mit den Augen und der Haut vermeiden.
Chemische Eigenschaften
1,3-Propanediol, an isomer of propylene glycol, is a viscous, colorless, odorless, hygroscopic liquid that has a brackish irritating taste. miscible with various solvents such as water, ethanol, acetone, chloroform (chloroform) and ether, and is insoluble in benzene. Combustible.
Definition
ChEBI: Propane-1,3-diol is the simplest member of the class of propane-1,3-diols, consisting of propane in which one hydrogen from each methyl group is substituted by a hydroxy group. A colourless, viscous, water-miscible liquid with a high (210℃) boiling point, it is used in the synthesis of certain polymers and as a solvent and antifreeze. It has a role as a protic solvent and a metabolite.
Application
1,3-Propanediol /PDO/ is mainly used for making polytrimethylene terephthalate polymer, which is used in fibers and fabrics, for example, carpets, textiles, engineering thermoplastics, nonwovens, films, and monofilaments. PDO finds also use as chain extender in thermoplastic polyurethanes, where it contributes to improved thermal, hydrolytic and dimensional stability. In adipate polyesters with other diols these diols are partly substituted by 1,3-propanediol to break crystallinity in order to obtain liquid polyester polyols. In polyesters for powder coatings PDO improves the flexibility but lowers the glass transition temperature somewhat. PDO finds also uses in cosmetics and personal care products, engine coolants, and solvents for ink-jet and screen inks.
Biosynthese
1,3-Propanediol (1,3-PDO) can be produced by fermentation from glycerol, with different strains such as Klebsiella pneumoniae, Clostridium butyricum, Clostridium pasteurianum, and Citrobacter freundii. Drawbacks of industrial fermentation using these strains are strong inhibition of 1,3-PDO production and by-products during fermentation.
Synthese
1,3-Propanediol is produced commercially by Degussa starting from acrolein.
CH2CHCHO + H2O → HOHCH2CH2CHO
HOHCH2CH2CHO + H2 → HOHCH2CH2CH2OH
The addition of water under mild acidic conditions gives 3-hydroxypropionaldehyde with high selectivity. Preferentially buffer solutions with a pH 4-5 or weak acidic ion exchange resins are used as catalysts. Further hydrogenation of this aqueous solutions gives 1,3-propanediol. There is an alternative route via hydroformylation of ethylene oxide and subsequent hydrogenation of the intermediate 3-hydroxypropionaldehyde.
läuterung methode
Dry this diol with K2CO3 and distil it under reduced pressure. More extensive purification involves conversion with benzaldehyde to 2-phenyl-1,3-dioxane (m 47-48o) which is subsequently decomposed by shaking with 0.5M HCl (3mL/g) for 15minutes and standing overnight at room temperature. After neutralisation with K2CO3, the benzaldehyde is removed by steam distillation and the diol is recovered from the remaining aqueous solution by continuous extraction with CHCl3 for 1day. The extract is dried with K2CO3, the CHCl3 is evaporated and the diol is distilled. [Foster et al. Tetrahedron 6 177 1961, Beilstein 1 IV 2493.]
Propan-1,3-diol Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
3-Propanolid
1,3-Propansulton
Cyclopropylamin
Fenitropane
1,3-Dichlorpropan
1R-cis-Permethrinic acid
(1R-cis)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropane carboxylic acid
(4S)-HYDROXY-3-METHYL-2-(2-PROPENYL)-2-CYCLOPENTENE-1-ONE
1,3-Dibrompropan
1R-trans-methyl caronaldehydate
2-Phenylpropan-1,3-diyldicarbamat
1R，3R-chrysanthemic acid
Glutarsure
Bronopol (INN)
1,3-Epoxypropan
2-PHENYL-1,3,2-DIOXABORINANE
2-Vinyl-1,3-dioxan
1-PHENYLVINYLBORONIC ACID, PROPANEDIOL CYCLIC ESTER
