| Company Name: |
klamar reagent |
| Tel: |
4001650900 |
| Email: |
sales-wang@klamar-reagent.com |
- Terpene resin
-
- $50.00
-
2025-05-23
- CAS:9003-74-1
- Min. Order: 1kg
- Purity: 99
- Supply Ability: 5000
- Terpene resin
-
- $1.00
-
2025-04-10
- CAS:9003-74-1
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 20T
- Terpene resin
-
- $1.00
-
2020-01-13
- CAS:9003-74-1
- Min. Order: 1KG
- Purity: 98%-99.9%
- Supply Ability: 100kg
|
| | Terpene resin Basic information |
| Product Name: | Terpene resin | | Synonyms: | TERPENE RESIN;Terpene Resin (High M.Wt);Terpene Resin (Low M.Wt.);Polyterpene resins;Terpene phenol resins;Terpene resin ISO 9001：2015 REACH;POLYTERPENE RESIN;12-[2-cyclohexa-1,5-dien-1-yl-4-[4-(3,5-diphenylphenyl)-2-hexa-1,3,5-trien-3-yl-1,2-dihydro-1,3,5-triazin-6-yl]-6-phenylphenyl]-5-phenylindolo[3,2-c]carbazole | | CAS: | 9003-74-1 | | MF: | | | MW: | 0 | | EINECS: | 202-110-6 | | Product Categories: | | | Mol File: | Mol File | ![Terpene resin Structure]() |
| | Terpene resin Chemical Properties |
| | Terpene resin Usage And Synthesis |
| Chemical Properties | As essentially pinene polymers, principally polymers from β-Pinene, the terpene resins exhibit properties typical of polymeric hydrocarbons including chemical inertness. They are inert to dilute mineral acids, alkalies, and salt solutions, and are characterized by acid numbers and saponification numbers less than four and approaching zero. Similarly, they are resistant to heat over a wide range of temperatures, varying only in fluidity with temperature. The commercially available Polyterpene Resins are produced with a variety of softening points (measured by the A.S.T.M ring-and-ball method E28-51T), ranging from 10~135 °C, corresponding to a range from viscous liquid to hard, brittle solid polymers at ordinary temperatures. | | Uses | Terpene Resin is a moisture barrier that is the betapinene polymer
obtained by polymerizing terpene hydrocarbons derived from wood.
it is used on soft gelatin capsules in an amount not to exceed 0.07%
of the weight of the capsule, and on powders of ascorbic acid or its
salts in an amount not to exceed 7% of the weight of the powder. |
| | Terpene resin Preparation Products And Raw materials |
|