| Company Name: |
Shangfluoro Gold |
| Tel: |
021-65170832 15601903708 |
| Email: |
qinba_2@163.com |
|
| | (Perfluorobutyl)ethylene Basic information |
| Product Name: | (Perfluorobutyl)ethylene | | Synonyms: | (PERFLUOROBUTYL)ETHYLENE;ZONYL(R) PFBE FLUOROTELOMER INTERMEDIATE;(perfluorobutyl)ethene;1-hexene-3,3,4,4,5,5,6,6,6-nonafluoro;3,3,4,4,5,5,6,6,6-nonafluoro-1-hexen;3,3,4,4,5,5,6,6-nonafluoro-1-hexen;3,3,4,4,5,5,6,6-nonafluoro-1-hexene;3,3,4,4,5,5,6,6,6-nonafluorohexene | | CAS: | 19430-93-4 | | MF: | C6H3F9 | | MW: | 246.07 | | EINECS: | 243-053-7 | | Product Categories: | Fluorous Chemistry;Fluorous Compounds;Synthetic Organic Chemistry | | Mol File: | 19430-93-4.mol |  |
| | (Perfluorobutyl)ethylene Chemical Properties |
| Boiling point | 59-60 °C(lit.) | | density | 1.452 g/mL at 25 °C(lit.) | | vapor density | 8.5 (vs air) | | vapor pressure | 20kPa at 20℃ | | refractive index | n20/D 1.3(lit.) | | Fp | 1 °F | | storage temp. | under inert gas (nitrogen or Argon) at 2-8°C | | solubility | acetone, MEK and trichloroethylene: soluble | | form | clear liquid | | color | Colorless to Light yellow to Light red | | Specific Gravity | 1.457 | | Water Solubility | 15.6mg/L at 20℃ | | BRN | 1819716 | | Henry's Law Constant | 9.0×10-8 mol/(m3Pa) at 25℃, HSDB (2015) | | Exposure limits | ACGIH: TWA 100 ppm | | InChI | 1S/C6H3F9/c1-2-3(7,8)4(9,10)5(11,12)6(13,14)15/h2H,1H2 | | InChIKey | GVEUEBXMTMZVSD-UHFFFAOYSA-N | | SMILES | FC(F)(F)C(F)(F)C(F)(F)C(F)(F)C=C | | LogP | 4.13 | | CAS DataBase Reference | 19430-93-4(CAS DataBase Reference) | | EPA Substance Registry System | 1-Hexene, 3,3,4,4,5,5,6,6,6-nonafluoro- (19430-93-4) |
| Hazard Codes | F | | Risk Statements | 11 | | Safety Statements | 16-29-33 | | RIDADR | UN 1993 3/PG 2 | | WGK Germany | 3 | | RTECS | MP7360000 | | Hazard Note | Flammable | | TSCA | TSCA listed | | HazardClass | 3 | | PackingGroup | II | | HS Code | 29033990 | | Storage Class | 3 - Flammable liquids | | Hazard Classifications | Flam. Liq. 2 | | Hazardous Substances Data | 19430-93-4(Hazardous Substances Data) | | Toxicity | LD orl-rat: >25 g/kg CRTXB2 21,149,90 |
| | (Perfluorobutyl)ethylene Usage And Synthesis |
| Chemical Properties |
CLEAR COLOURLESS LIQUID
IUPAC Name: 3,3,4,4,5,5,6,6,6-nonafluorohex-1-ene
| | Uses | 1H,1H,2H-Perfluoro-1-hexene is used to generate fluoropolymeers for use in coatings. | | Application | The substance (perfluorobutyl)ethylene is used as a co-monomer up to 0.09% w/w in producing polytetrafluoroethylene (PTFE) polymers processed at high temperatures. Examples of intended uses are coated cookware, such as coatings on frying pans and articles for oven baking, and moulded articles for industrial use. | | Cytotoxicity |
(Perfluorobutyl)ethylene (also known as Perfluorobutyl ethlene) was examined for its potential to induce reverse mutations in bacteria, forward mutations at the thymidine kinase (tk) locus in mouse lymphoma L5178Y cells, and structural chromosomal aberrations in Chinese Hamster Ovary (CHO) cells. Negative results were obtained in adequate studies, both in absence and presence of exogenous metabolic activation. Therefore, (perfluorobutyl)ethylene is considered non-genotoxic.
| | Safety Profile | Low toxicity by ingestion andinhalation routes. When heated to decomposition it emitstoxic vapors of Fí. | | Toxics Screening Level | The initial threshold screening level (ITSL) for Perfluorobutylethylene (PFBE) is 10,000 μg/m3 based on an 8-hour averaging time. The ITSL for the annual averaging time is 2,600 μg/m3. |
| | (Perfluorobutyl)ethylene Preparation Products And Raw materials |
|