Chemical Safety Data Sheet MSDS / SDS

Boron Trifluoride - Butanol Reagent (10-20%) [for Esterification] (1ml*10)

Revision Date:2026-03-20Revision Number:1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product identifier

  • Product name: Boron Trifluoride - Butanol Reagent (10-20%) [for Esterification] (1ml*10)
  • CBnumber: CB61570306
  • CAS: 692-39-7
  • EINECS Number: 231-569-5
  • Synonyms: Boron Trifluoride-Butanol;Butoxytrifluoro-lambda4-borane

Relevant identified uses of the substance or mixture and uses advised against

  • Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
  • Uses advised against: none

Company Identification

  • Company: Chemicalbook
  • Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
  • Telephone: 010-86108875

SECTION 2: Hazards identification

GHS Label elements, including precautionary statements

  • Symbol(GHS) No data available
  • Signal wordNo data available
Precautionary statements
No data available
Hazard statements
No data available

SECTION 3: Composition/information on ingredients

Substance

  • Product name: Boron Trifluoride - Butanol Reagent (10-20%) [for Esterification] (1ml*10)
  • Synonyms: Boron Trifluoride-Butanol;Butoxytrifluoro-lambda4-borane
  • CAS: 692-39-7
  • EC number: 231-569-5

SECTION 4: First aid measures

If inhaled

Remove person to fresh air and keep comfortable for breathing. Get medical advice/ attention if you feel unwell.

In case of skin contact

Take off all contaminated clothing immediately. If on skin, rinse well with water. If skin irritation or rash occurs: Get medical advice/ attention.

In case of eye contact

Rinse with plenty of water. If easy to do, remove contact lens, if worn. If eye irritation persists: Get medical advice/ attention.

If swallowed

Immediately call a POISON CENTER or doctor/ physician. Rinse mouth. Do NOT induce vomiting.

Most important symptoms and effects, both acute and delayed

None known.

SECTION 5: Firefighting measures

Suitable extinguishing media

Dry powder, Dry sand, Carbon dioxide (CO2)

Unsuitable extinguishing media

Water

Specific hazards during fire fighting

No information available.

Specific extinguishing methods

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.

Special protective equipment for fire-fighters

Use personal protective equipment.

NFPA 704

3
3
0
HEALTH 3 Short exposure could cause serious temporary or moderate residual injury (e.g. liquid hydrogen, sulfuric acid, calcium hypochlorite, hexafluorosilicic acid)
FIRE 3 Liquids and solids (including finely divided suspended solids) that can be ignited under almost all ambient temperature conditions . Liquids having a flash point below 22.8 °C (73 °F) and having a boiling point at or above 37.8 °C (100 °F) or having a flash point between 22.8 and 37.8 °C (73 and 100 °F). (e.g. gasoline, acetone)
REACT 0 Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2)
SPEC. HAZ.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear suitable protective equipment. Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.

Environmental precautions

Prevent product from entering drains.

Methods and materials for containment and cleaning up

Collect as much of the spill as possible with a suitable absorbent material.

SECTION 7: Handling and storage

Handling

Technical measures
Prevent generation of vapor or mist. Take precautionary measures against static discharge. Use explosion-proof equipment.
Local/Total ventilation
Ensure adequate ventilation. Handle product only in closed system or provide appropriate exhaust ventilation at machinery. Use a local exhaust ventilation.
Advice on safe handling
Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not subject to grinding, shock or friction. Wash hands and face thoroughly after handling. Open drum carefully as content may be under pressure. Keep only in original packaging.
Avoidance of contact
Oxidizing agents, Bases, water, Metals

Storage

Conditions for safe storage
Keep container tightly closed. Store in a freezer. Keep in a well-ventilated place. Use explosion-proof equipment. Protect from moisture. Keep under inert gas. Store locked up.

SECTION 8: Exposure controls/personal protection

Ingredients with workplace control parameters

ComponentsCAS RNValue type (Form of ex- posure)Control parameters / Permissible con- centrationBasis
1-Butanol71-36-3PC-TWA100 mg/m3CN OEL
TWA20 ppmACGIH

Components CAS RN Value type Control parameters Basis (Form of ex- / Permissible conposure) centration 1-Butanol 71-36-3 PC-TWA 100 mg/m3 CN OEL
TWA 20 ppm ACGIH

Engineering measures

Install a closed system or local exhaust.
Also install safety shower and eye bath.

Personal protective equipment

Respiratory protection
Gas mask
Self-contained breathing apparatus
Eye/face protection
Safety glasses
Safety goggles
Face-shield
Skin and body protection
Impervious protective clothing
Hand protection
Impervious gloves *Use personal protective equipment(PPE) approved under appropriate government standards and follow local and national regulations.

SECTION 9: Physical and chemical properties

Information on basic physicochemical properties

  • Physical stateclear liquid
  • Viscosity, kinematicNo data available
  • Decomposition temperatureNo data available
  • Autoignition temperatureNo data available
  • Partition coefficient: n-octanol/water (log value)No data available
  • Solubility in other solventsNo data available
  • Water solubilityNo data available
  • Relative density0.90
  • Relative vapor density2.6
  • Vapor pressure0.7 kPa (20 °C)
  • Lower explosion limit / Lower flammability limitNo data available
  • Upper explosion limit / Upper flammability limitNo data available
  • FlammabilityNo data available
  • Evaporation rateNo data available
  • Flash pointNo data available
  • Boiling point/boiling rangeNo data available
  • Melting point/freezing pointNo data available
  • Viscosity, dynamicNo data available
  • pHNo data available
  • Odor ThresholdNo data available
  • OdorNo data available
  • Colorcolorless - yellow
  • Appearanceliquid

SECTION 10: Stability and reactivity

Reactivity

No data available

Chemical stability

Stable under normal conditions.

Possibility of hazardous reactions

Decomposes in contact with water and liberates toxic gases.

Conditions to avoid

Heat. Electrical spark Open flame Electrostatic discharge Exposure to moisture.

Incompatible materials

Oxidizing agents, Bases, water, Metals

Hazardous decomposition products

No data available

SECTION 11: Toxicological information

Acute toxicity

Product

Acute oral toxicity

Assessment: The component/mixture is moderately toxic after single ingestion.

Acute inhalation toxicity

Assessment: The component/mixture is moderately toxic after short term inhalation.

Acute dermal toxicity

Assessment: The component/mixture is moderately toxic after single contact with skin.

Components

1-Butanol

Acute oral toxicity

LDLo (Humans): 428 mg/kg Assessment: The component/mixture is moderately toxic after single ingestion.

LD50 (Rat)

790 mg/kg

Acute inhalation toxicity

LC50 (Rat): 24,000 mg/m3 Exposure time: 4 h Test atmosphere: dust/mist Assessment: The substance or mixture has no acute inhalation toxicity

Acute dermal toxicity

LD50 (Rabbit): 3,400 mg/kg Assessment: The component/mixture is minimally toxic after single contact with skin.

Boron Trifluoride - Butanol Complex

Acute oral toxicity

Assessment: The component/mixture is moderately toxic after single ingestion.

Acute inhalation toxicity

Assessment: The component/mixture is moderately toxic after short term inhalation.

Acute dermal toxicity

Assessment: The component/mixture is moderately toxic after single contact with skin.

Skin corrosion/irritation

Product

Result

Causes burns.

Components

1-Butanol

Result

Skin irritation

Boron Trifluoride - Butanol Complex

Result

Causes burns.

Serious eye damage/eye irritation

Product

Result

Irreversible effects on the eye

Components

1-Butanol

Result

Irreversible effects on the eye

Boron Trifluoride - Butanol Complex

Result

Irreversible effects on the eye

Respiratory or skin sensitization

No information available.

Germ cell mutagenicity

No information available.

Carcinogenicity

No information available.

Reproductive toxicity

No information available.

STOT-single exposure

Product

Assessment

May cause respiratory irritation. May cause drowsiness or dizziness.

Target Organs

Respiratory system, Cardio-vascular system

Assessment

May cause damage to organs.

Components

1-Butanol

Assessment

May cause respiratory irritation. May cause drowsiness or dizziness.

Boron Trifluoride - Butanol Complex

Target Organs

Respiratory system, Cardio-vascular system

Assessment

May cause damage to organs.

STOT-repeated exposure

Product

Target Organs

Respiratory system, Kidney, Central nervous system, Auditory system

Assessment

Causes damage to organs through prolonged or repeated exposure.

Target Organs

Bone, Teeth

Assessment

May cause damage to organs through prolonged or repeated exposure.

Components

1-Butanol

Target Organs

Central nervous system, Auditory system

Assessment

Causes damage to organs through prolonged or repeated exposure.

Boron Trifluoride - Butanol Complex

Target Organs

Respiratory system, Kidney

Assessment

Causes damage to organs through prolonged or repeated exposure.

Target Organs

Bone, Teeth

Assessment

May cause damage to organs through prolonged or repeated exposure.

Repeated dose toxicity

No information available.

Aspiration toxicity

Product

Components

1-Butanol

RTECS No.

EO1400000 (1-Butanol)

SECTION 12: Ecological information

Ecotoxicity

Components:

1-Butanol:

Toxicity to fish
LC50 (Oryzias latipes (Japanese medaka)): > 100 mg/l Exposure time: 96 h
Toxicity to daphnia and other aquatic invertebrates
EC50 (Daphnia magna (Water flea)): > 1,000 mg/l Exposure time: 48 h
Toxicity to algae/aquatic plants
EC50 (Selenastrum capricornutum (green algae)): > 1,000 mg/l Exposure time: 72 h

Persistence and degradability

No data available

Bioaccumulative potential

Components:

1-Butanol:

octanol/water (log value)
Partition coefficient: noctanol/water (log value)
0.88

Mobility in soil

Components:

1-Butanol:

tal compartments
Distribution among environmental compartments
Koc: 72

Other adverse effects

No data available

SECTION 13: Disposal considerations

Disposal methods

Waste from residues
Disposal in accordance with local and national regulations. Take precautions against ignition or explode. Entrust disposal to a licensed waste disposal company.
Contaminated packaging
Disposal in accordance with local and national regulations. Before disposal of used container, remove contents completely.

SECTION 14: Transport information

International Regulations

IATA-DGR

UN/ID No.
UN 2920
Proper shipping name
Corrosive liquid, flammable, n.o.s.
Class
8
Subsidiary risk
3
Packing group
II

IMDG-Code

UN number
UN 2920
Proper shipping name
CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Class
8
Subsidiary risk
3
Packing group
II
EmS Code
F-E, S-C

Domestic regulation

GB 6944/12268

UN number
UN 2920
Proper shipping name
CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Class
8
Subsidiary risk
3
Packing group
II

SECTION 15: Regulatory information

Regulations on Safety Management of Hazardous Chemicals

Catalogue of Hazardous Chemicals
Listed

Measures on the Environmental Administration of New Chemical Substances Registration

Registration/Notification number
B1A232216195
Downstream users need to comply with the conditions of safe use of the chemical, understand the environmental and health hazard and risk management measures identified on the SDS as well as the local/national regulations concerning the chemical.

The ingredients of this product are reported in the following inventories

CH BAGREG
Not in compliance with the inventory
TSCA
Product contains substance(s) not listed on TSCA inventory.
AIIC
Not in compliance with the inventory
DSL
This product contains the following components that are not on the
Canadian DSL nor NDSL.
Boron Trifluoride - Butanol Complex
ENCS
On the inventory, or in compliance with the inventory
ISHL
On the inventory, or in compliance with the inventory
KECI
Not in compliance with the inventory
PICCS
Not in compliance with the inventory
IECSC
Not in compliance with the inventory
NZIoC
Not in compliance with the inventory

SECTION 16: Other information

Abbreviations and acronyms

CAS: Chemical Abstracts Service
TWA: Time-Weighted Average
STEL: Short-Term Exposure Limit
LD50: Lethal Dose 50%
LC50: Lethal Concentration 50%
EC50: Effective Concentration 50%
PEL: Permissible Exposure Limit
TLV: Threshold Limit Value
IMDG: International Maritime Dangerous Goods Code
IATA: International Air Transport Association
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
DOT: US Department of Transportation
NFPA: National Fire Protection Association
NIOSH: National Institute for Occupational Safety and Health
OSHA: Occupational Safety and Health Administration
Disclaimer:

The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.

Recommended Products
2-Butanol SDS Boron trifluoride-butyl ether complex SDS Boron trifluoride tetrahydrofuran complex SDS Boron Trifluoride - Butanol Reagent (10-20%) [for Esterification] (1ml*10) SDS BORON TRIFLUORIDE-METHANOL SDS