| Identification | More | [Name]
4-Propylcyclohexanone | [CAS]
40649-36-3 | [Synonyms]
4-N-PROPYLCYCLOHEXANONE
4-PROPYLCYCLOHEXANONE
PROPYLCYCLOHEXAN-4-ONE
TIMTEC-BB SBB008421
Cyclohexanone, 4-propyl-
4-n-Propylcyclohexanone,99%
Propylcyclohexan-4-one 98%
4-Propylcyclohexanon | [EINECS(EC#)]
406-810-4 | [Molecular Formula]
C9H16O | [MDL Number]
MFCD00058690 | [Molecular Weight]
140.22 | [MOL File]
40649-36-3.mol |
| Chemical Properties | Back Directory | [Melting point ]
32.57°C (estimate) | [Boiling point ]
115°C 36mm | [density ]
0.907 g/mL at 20 °C(lit.)
| [vapor pressure ]
0.23 hPa (20 °C) | [refractive index ]
n20/D 1.453
| [Fp ]
86°C | [storage temp. ]
Store below +30°C. | [solubility ]
1.96g/l | [form ]
clear liquid | [color ]
Colorless to Almost colorless | [PH]
6.0 (2g/l, H2O, 20℃) | [Water Solubility ]
1.96g/L at 20℃ | [Usage]
Intermediates of Liquid Crystals | [BRN ]
2076023 | [LogP]
2.6 at 20℃ | [CAS DataBase Reference]
40649-36-3(CAS DataBase Reference) | [NIST Chemistry Reference]
4-Propylcyclohexanone(40649-36-3) |
| Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R38:Irritating to the skin.
R52/53:Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S25:Avoid contact with eyes .
S37:Wear suitable gloves .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
NA 1993 / PGIII | [WGK Germany ]
1
| [Autoignition Temperature]
320 °C | [Hazard Note ]
Irritant | [HS Code ]
29142900 | [Toxicity]
LD50 orally in Rabbit: > 2000 mg/kg |
| Hazard Information | Back Directory | [Chemical Properties]
Colorless liquid | [Uses]
Intermediates of Liquid Crystals | [Flammability and Explosibility]
Notclassified | [Synthesis]
General procedure for the synthesis of n-propylcyclohexane, n-propylbenzene, and 4-n-propylcyclohexanone from 4-propylphenol: 4-propylphenol (5.0 mmol, 681 mg), catalyst (2 wt% Pt loading, 98 mg), and water (40 mL) were added to a pre-dried high-pressure intermittent reactor (OM Lab-Tech MMJ-100, SUS316, 100 mL). After pressurization with H2 to 2 MPa at room temperature, the reactor was heated to the set reaction temperature while maintaining continuous stirring at 600 rpm. The reactor was maintained at the reaction temperature for 1 hour. Upon completion of the reaction, the reactor was cooled to room temperature and the reaction mixture was extracted with ethyl acetate, and the organic layer was analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) using 2-isopropylphenol as an internal standard.The GC analysis was performed using a Shimadzu GC-14B integrator (C-R8A) equipped with a capillary column (HR-1, 0.25 mm I.D. × 50 μm). GC-MS analysis was performed on a Shimadzu GC-2010/PARVUM2 equipped with the same capillary column. The catalyst was recovered by centrifugation, followed by washing with ethyl acetate and drying in an oven at 120 °C for 2 hours. The recovered catalyst can be reused for the next reaction. For time course studies, multiple batches of reactions were required at different time points. The reaction time "0" is defined as the point at which the temperature of the reaction mixture reaches the set reaction temperature. | [References]
[1] Catalysis Today, 2014, vol. 234, p. 139 - 144 |
|
|