5-(4-BROMOPHENYL)-5-OXOVALERIC ACID

5-(4-BROMOPHENYL)-5-OXOVALERIC ACID Suppliers list
Company Name: Shaanxi Dideu Medichem Co. Ltd
Tel: +86-029-81138252 +86-173 9270 1263
Email: 1057@dideu.com
Products Intro: Product Name: 5-(4-BROMOPHENYL)-5-OXOVALERIC ACID
CAS:35333-26-7
Purity:99% Package:1KG;1USD
Company Name: ATK CHEMICAL COMPANY LIMITED
Tel: +undefined-21-51877795
Email: ivan@atkchemical.com
Products Intro: CAS:35333-26-7
Purity:98% HPLC Package:5G;10G;25G;50G;100G;250G;1KG
Company Name: Accela ChemBio Inc.
Tel: +1-858-6993322
Email: info@accelachem.com
Products Intro: Product Name:5-(4-Bromophenyl)-5-oxopentanoic Acid
CAS:35333-26-7
Purity:>95% Package:0.1g;0.25g;1g;5g Remarks:SY112757
Company Name: Career Henan Chemica Co
Tel: +86-0371-86658258 +8613203830695
Email: laboratory@coreychem.com
Products Intro: Product Name:5-(4-BROMOPHENYL)-5-OXOVALERIC ACID
CAS:35333-26-7
Purity:0.99 Package:1KG;7KG Judy@corechem.com
Company Name: ANHUI WITOP BIOTECH CO., LTD
Tel: +8615255079626
Email: eric@witopchemical.com
Products Intro: Product Name:5-(4-bromophenyl)-5-oxo-pentanoic acid
CAS:35333-26-7

5-(4-BROMOPHENYL)-5-OXOVALERIC ACID manufacturers

5-(4-BROMOPHENYL)-5-OXOVALERIC ACID Basic information
Product Name:5-(4-BROMOPHENYL)-5-OXOVALERIC ACID
Synonyms:5-(4-BROMOPHENYL)-5-OXOVALERIC ACID;OTAVA-BB 1043539;UKRORGSYN-BB BBV-213517;Benzenepentanoic acid, 4-bromo-δ-oxo-;4-Bromo-δ-oxobenzenepentanoic acid
CAS:35333-26-7
MF:C11H11BrO3
MW:271.11
EINECS:233-305-4
Product Categories:
Mol File:35333-26-7.mol
5-(4-BROMOPHENYL)-5-OXOVALERIC ACID Structure
5-(4-BROMOPHENYL)-5-OXOVALERIC ACID Chemical Properties
Melting point 116-118 °C(Solv: ethyl acetate (141-78-6); hexane (110-54-3))
Boiling point 442.3±30.0 °C(Predicted)
density 1.495±0.06 g/cm3(Predicted)
storage temp. Sealed in dry,Room Temperature
pka4.58±0.10(Predicted)
Safety Information
MSDS Information
5-(4-BROMOPHENYL)-5-OXOVALERIC ACID Usage And Synthesis
Synthesis
Glutaric anhydride

108-55-4

Bromobenzene

108-86-1

5-(4-BROMOPHENYL)-5-OXOVALERIC ACID

35333-26-7

Anhydrous aluminum trichloride (78.8 mmol, 10.5 g, 2.3 eq.) and anhydrous dichloromethane (25 mL) were added to the flask under a protective tube of calcium chloride and the resulting suspension was stirred in an ice bath. Subsequently, a solution of anhydrous dichloromethane (15 mL) with glutaric anhydride (34.3 mmol, 3.91 g) was added slowly dropwise, keeping the reaction temperature below 7 °C. The reaction was carried out in an ice bath. After the dropwise addition was completed, stirring was continued in an ice bath for 30 min, and then bromobenzene (34.3 mmol, 5.39 g, 1.0 eq.) was carefully added. The ice bath was removed and the reaction mixture was stirred at room temperature for 19 hours. Upon completion of the reaction, the mixture was poured into ice water (15 mL) and acidified with concentrated hydrochloric acid. The aqueous layer was washed with sodium sulfate (10 mL) and the organic phase was extracted with ethyl acetate (1 × 100 mL, 2 × 50 mL). The organic phases were combined, dried with anhydrous sodium sulfate, filtered and concentrated. The crude product was dissolved in ethyl acetate and this solution was added slowly dropwise to cold hexane (1 L) with vigorous stirring. The precipitate was collected by filtration and dried to give 5-(4-bromophenyl)-5-oxovaleric acid (7.93 g, 85%) as a yellow powder with a melting point of 125-127 °C.1H NMR (300 MHz, CDCl3): δ= 2.07 (m, 2H), 2.50 (t, J = 7.2 Hz, 2H), 3.04 (t, J = 7.2 Hz, 2H), 7.60 (m, 2H). 7.60 (m, 2H), 7.82 (m, 2H). 5-(4-Bromophenyl)-5-oxovaleric acid (25.0 mmol, 6.78 g), paraformaldehyde (86.3 mmol, 2.59 g, 3.4 eq.), and piperidine (0.57 mL, 0.24 eq.) were dissolved/suspended in pyridine (42 mL) and stirred for 21 hr. at 70 °C. Upon completion of the reaction, the mixture was poured into a mixture of 1 M sulfuric acid (200 mL) and concentrated hydrochloric acid. The aqueous layer was washed with sodium sulfate (15 mL) and the organic phase was extracted with ethyl acetate (1 × 150 mL, 2 × 100 mL). The organic phases were combined, washed with half-saturated brine (300 mL), dried over anhydrous sodium sulfate, filtered and concentrated. The crude product was crystallized with ethyl acetate to give 4-(4-bromobenzoyl)pent-4-enoic acid (3.93 g, 56%) as an orange-yellow solid with a melting point of 127-128 °C. 1H NMR (300 MHz, CDCl3): δ= 2.63 (t, J = 6.9 Hz, 2H), 2.80 (t, J = 6.9 Hz, 2H), 5.67 (s, 1H) , 5.95 (s, 1H), 7.60 (m, 4H); 13C NMR (75 MHz, CDCl3): δ= 27.2, 32.6, 127.3, 127.4, 131.0, 131.6, 136.3, 145.8, 178.9, 196.6.

References[1] Russian Journal of General Chemistry, 2014, vol. 84, # 9, p. 1825 - 1829
[2] Zhurnal Obshchei Khimii, 2014, vol. 84, # 9, p. 1825 - 1829,5
[3] Tetrahedron Letters, 2016, vol. 57, # 10, p. 1079 - 1082
[4] Heterocycles, 2005, vol. 65, # 3, p. 649 - 656
5-(4-BROMOPHENYL)-5-OXOVALERIC ACID Preparation Products And Raw materials
Raw materialsGlutaric anhydride-->Bromobenzene-->Dichloromethane-->Aluminum chloride
Tag:5-(4-BROMOPHENYL)-5-OXOVALERIC ACID(35333-26-7) Related Product Information
5-(4-BROMO-PHENYL)-2H-TETRAZOLE 5-(4-bromophenyl)pentanoic acid 5-(4-bromophenyl)-5-oxopentanoic acid methyl ester OXITROPIUM BROMIDE 5-(2-chlorophenyl)thiophene-2-carboxylic acid 5-(4-BROMO-2-METHYLPHENYL)-5-OXOVALERIC ACID SALOR-INT L152579-1EA ETHYL 5-(4-BROMO-2-METHYLPHENYL)-5-OXOVALERATE CIS-2-[2-(4-BROMOPHENYL)-2-OXOETHYL]CYCLOHEXANE-1-CARBOXYLIC ACID SALOR-INT L152552-1EA 6-BROMOCHROMONE-3-PROPIONIC ACID ETHYL 5-(4-BROMOPHENYL)-5-OXOVALERATE TRANS-2-[2-(4-BROMOPHENYL)-2-OXOETHYL]CYCLOPENTANE-1-CARBOXYLIC ACID SALOR-INT L152560-1EA TRANS-2-[2-(4-BROMOPHENYL)-2-OXOETHYL]CYCLOHEXANE-1-CARBOXYLIC ACID 5-(4-BROMOPHENYL)-5-OXOVALERIC ACID