|
|
| | 2,4,6-TRIS(4-CARBOXYPHENYL)-1,3,5-TRIAZINE Basic information |
| Product Name: | 2,4,6-TRIS(4-CARBOXYPHENYL)-1,3,5-TRIAZINE | | Synonyms: | 2,4,6-TRIS(4-CARBOXYPHENYL)-1,3,5-TRIAZINE;2,4,6-Tris(carboxyphenyl)-1,3,5-triazine;4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzoic acid;2,4,6-Tris(4-carboxyphenyl)-s-triazine;4,4μ,4-s-Triazine-2,4,6-triyl-tribenzoic acid;4,4μ4-[1,3,5]Triazine-2,4,6-triyl-tris-benzoic acid;H3TATB;p-Cyanobenzoic acid trimer | | CAS: | 61414-16-2 | | MF: | C24H15N3O6 | | MW: | 441.39 | | EINECS: | | | Product Categories: | pharmacetical;Alternative Energy;Materials for Hydrogen Storage;Materials Science;Metal Organic Frameworks (MOFs);Organic Linker Molecules;Physisorption | | Mol File: | 61414-16-2.mol |  |
| | 2,4,6-TRIS(4-CARBOXYPHENYL)-1,3,5-TRIAZINE Chemical Properties |
| Melting point | 83-88℃ | | Boiling point | 799.9±70.0 °C(Predicted) | | density | 1.458±0.06 g/cm3(Predicted) | | storage temp. | Sealed in dry,Room Temperature | | solubility | Aqueous Base (Slightly), DMSO (Slightly, Heated) | | form | Solid | | pka | 3.27±0.10(Predicted) | | color | White to Off-White | | InChI | InChI=1S/C24H15N3O6/c28-22(29)16-7-1-13(2-8-16)19-25-20(14-3-9-17(10-4-14)23(30)31)27-21(26-19)15-5-11-18(12-6-15)24(32)33/h1-12H,(H,28,29)(H,30,31)(H,32,33) | | InChIKey | MSFXUHUYNSYIDR-UHFFFAOYSA-N | | SMILES | N1=C(C2=CC=C(C=C2)C(O)=O)N=C(C2=CC=C(C=C2)C(O)=O)N=C1C1=CC=C(C=C1)C(O)=O |
| | 2,4,6-TRIS(4-CARBOXYPHENYL)-1,3,5-TRIAZINE Usage And Synthesis |
| Uses | 4,4′,4′′-s-Triazine-2,4,6-triyl-tribenzoic acid (H3TATB) is an electron acceptor that can be used in the synthesis of an electrochromic material (ECM). ECM can be used for a variety of applications such as electronic paper, smart windows, and energy storage devices. It can also be used in the formation of a metal-organic framework (MOF) for potential usage in CO2 adsorption. It can be used in the preparation of PCN-333(Al) based MOFs for the fabrication of an electrochemical biosensor. | | General Description | This product has been enhanced for energy efficiency. | | Synthesis | General procedure for the synthesis of 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine from 2,4,6-tris-tosyl-1,3,5-triazine: 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine (1.0 g, 2.8 mmol), acetic acid (24.85 mL), and concentrated sulfuric acid (1.58 mL) were added to a 100 mL round-bottomed flask and stirred for for 5 minutes. Subsequently, the reaction mixture was heated to 50 °C and a solution consisting of chromium trioxide (2.58 g) dissolved in a mixture of acetic acid (5 mL) and concentrated sulfuric acid (5 mL) was added slowly and dropwise. The resulting dark brown slurry was stirred overnight. Upon completion of the reaction, the reaction mixture was filtered and the solid residue was collected. The residue was redissolved in 2N sodium hydroxide solution and filtered to remove insoluble impurities. Finally, the filtrate was acidified with 6N hydrochloric acid to afford the white precipitated product 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine (H3TATB) in 60% yield. The product was characterized by 1H NMR (400 MHz, DMSO-d6): δ=8.80 ppm (d, J=8.5 Hz, 6H), 8.18 (d, J=8.5 Hz, 6H); mass spectrometry (ESI) analysis showed [M-H]- peaks, and molecular weights of 440.0800 for the calculated value of C24H14N3O6 and 440.0100 for the measured value. | | References | [1] Journal of the American Chemical Society, 2006, vol. 128, # 12, p. 3896 - 3897
[2] Zeitschrift fur Anorganische und Allgemeine Chemie, 2015, vol. 641, # 10, p. 1781 - 1785
[3] Journal of the American Chemical Society, 2015, vol. 137, # 4, p. 1663 - 1672
[4] Journal of the American Chemical Society, 2015, vol. 137, # 36, p. 11801 - 11809
[5] Journal of Materials Chemistry C, 2016, vol. 4, # 25, p. 6117 - 6130 |
| | 2,4,6-TRIS(4-CARBOXYPHENYL)-1,3,5-TRIAZINE Preparation Products And Raw materials |
|