Chemical Safety Data Sheet MSDS / SDS

ACETOPHENONE-D8

Revision Date:2026-03-21Revision Number:1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product identifier

  • Product name: ACETOPHENONE-D8
  • CBnumber: CB1697683
  • CAS: 19547-00-3
  • Synonyms: Acetophenone-d?;<2H8>Acetophenone

Relevant identified uses of the substance or mixture and uses advised against

  • Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
  • Uses advised against: none

Company Identification

  • Company: Chemicalbook
  • Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
  • Telephone: 010-86108875

SECTION 2: Hazards identification

GHS Label elements, including precautionary statements

  • Symbol(GHS)
  • Signal wordWarning
Precautionary statements
P337+P313 IF eye irritation persists: Get medical advice/attention.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P301+P312 IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P270 Do not eat, drink or smoke when using this product.
P264 Wash skin thouroughly after handling.
Hazard statements
H302 Harmful if swallowed
H319 Causes serious eye irritation

SECTION 3: Composition/information on ingredients

Substance

  • Product name: ACETOPHENONE-D8
  • Synonyms: Acetophenone-d?;<2H8>Acetophenone
  • CAS: 19547-00-3
  • MF: C8D8O
  • MW: 128.2

SECTION 4: First aid measures

4.1 Description of first-aid measures

General advice
Show this material safety data sheet to the doctor in attendance.
If inhaled
After inhalation: fresh air.
In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
In case of eye contact
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
If swallowed
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed

The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11

4.3 Indication of any immediate medical attention and special treatment needed

No data available

4.4 Notes to physician

No data available

SECTION 5: Firefighting measures

5.1 Extinguishing media

Suitable extinguishing media
Water Foam Carbon dioxide (CO2) Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.

5.2 Special hazards arising from the substance or mixture

Carbon oxides
Combustible.
Vapors are heavier than air and may spread along floors.
Forms explosive mixtures with air on intense heating.
Development of hazardous combustion gases or vapours possible in the event of fire.

5.3 Advice for firefighters

In the event of fire, wear self-contained breathing apparatus.
Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.

NFPA 704

2
2
0
HEALTH 2 Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury (e.g. diethyl ether, ammonium phosphate, iodine)
FIRE 2 Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur and multiple finely divided suspended solids that do not require heating before ignition can occur. Flash point between 37.8 and 93.3 °C (100 and 200 °F). (e.g. diesel fuel, sulfur)
REACT 0 Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2)
SPEC. HAZ.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition.
Evacuate the danger area, observe emergency procedures, consult an expert.
For personal protection see section 8.

6.2 Environmental precautions

Do not let product enter drains.

6.3 Methods and materials for containment and cleaning up

Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ).
Dispose of properly. Clean up affected area.

6.4 Reference to other sections

For disposal see section 13.

SECTION 7: Handling and storage

7.1 Precautions for safe handling

Advice on protection against fire and explosion
Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge.
Hygiene measures
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Storage conditions
Tightly closed.
Storage class
Storage class (TRGS 510): 10: Combustible liquids

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Ingredients with workplace control parameters
['Component', 'CAS-No.', 'Value', 'Control\nparameters', 'Basis']['acetophenone-d₈', '19547-00-\n3', 'TWA', '10 ppm', 'USA. ACGIH Threshold Limit\nValues (TLV)']['', '', 'TWA', '10 ppm', 'USA. Workplace Environmental\nExposure Levels (WEEL)']

PEL 10 ppm49 California permissible exposure mg/m3 limits for chemical contaminants (Title 8, Article 107)

8.2 Exposure controls

Appropriate engineering controls
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin protection
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: butyl-rubber
Minimum layer thickness: 0.7 mm
Break through time: 480 min
Material tested:Butoject® (KCL 898)
Splash contact
Material: Latex gloves
Minimum layer thickness: 0.6 mm
Break through time: 30 min
Material tested:Lapren® (KCL 706 / Aldrich Z677558, Size M)
Body Protection
protective clothing
Respiratory protection
required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties

Information on basic physicochemical properties

  • a) Physical stateliquid
  • b) ColorColourless
  • c) OdorNo data available
  • d) Melting point/freezing pointMelting point/range: 19 - 20 °C - lit.
  • e) Initial boiling point and boiling range202 °C - lit.
  • f) Flammability (solid, gas)No data available
  • g) Upper/lower flammability or explosive limitsUpper explosion limit: 5.2 %(V)
    Lower explosion limit: 1.4 %(V)
  • h) Flash point76.00 °C - closed cup
  • i) Autoignition temperatureNo data available
  • j) Decomposition temperatureNo data available
  • k) pHNo data available
  • l) ViscosityViscosity, kinematic: No data available
    Viscosity, dynamic: No data available
  • m) Water solubilityNo data available
  • n) Partition coefficient n-octanol/waterNo data available
  • o) Vapor pressure1 hPa at 15.00 °C
  • p) Density1.098 g/mL at 25 °C 1.098 g/cm3 at 25 °C
  • Relative density1.098 g/mL at 25 °C
  • q) Relative vapor densityNo data available
  • r) Particle characteristicsNo data available
  • s) Explosive propertiesNo data available
  • t) Oxidizing propertiesnone
  • SolubilityChloroform (Slightly), Methanol (Slightly)

9.2 Other safety information

No data available

SECTION 10: Stability and reactivity

10.1 Chemical stability

The product is chemically stable under standard ambient conditions (room temperature) .

10.2 Possibility of hazardous reactions

Exothermic reaction with:
Strong oxidizing agents strong alkalis strong reducing agents

10.3 Conditions to avoid

Strong heating.

10.4 Incompatible materials

No data available

10.5 Hazardous decomposition products

No data available
In the event of fire: see section 5

SECTION 11: Toxicological information

11.1 Information on toxicological effects

Acute toxicity
LD50 Oral - Rat - 815 mg/kg
Remarks: (RTECS)
The value is given in analogy to the following substances: acetophenone
Inhalation: No data available
LD50 Dermal - Rat - male and female - 3,300 mg/kg (OECD Test Guideline 402)
Remarks: The value is given in analogy to the following substances: acetophenone
Skin corrosion/irritation
Skin - Rabbit
Result: No skin irritation - 24 h (OECD Test Guideline 404)
Remarks: The value is given in analogy to the following substances: acetophenone
Serious eye damage/eye irritation
Eyes - Rabbit
Result: Irritating to eyes.
Remarks: (RTECS)
The value is given in analogy to the following substances: acetophenone
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Respiratory or skin sensitization
Classified based on available data. For more details, see section 2
Germ cell mutagenicity
Test Type: In vitro mammalian cell gene mutation test
Test system: mouse lymphoma cells
Metabolic activation: with and without metabolic activation
Method: OECD Test Guideline 476
Result: negative
Remarks: The value is given in analogy to the following substances: acetophenoneTest
Type: Ames test
Test system: Salmonella typhimurium
Metabolic activation: with and without metabolic activation
Method: OECD Test Guideline 471
Result: negative
Remarks: The value is given in analogy to the following substances: acetophenoneTest
Type: Mutagenicity (mammal cell test): chromosome aberration.
Test system: Chinese hamster lung cells
Metabolic activation: Metabolic activation
Method: OECD Test Guideline 473
Result: positive
Remarks: The value is given in analogy to the following substances: acetophenoneTest
Type: Mutagenicity (mammal cell test): chromosome aberration.
Test system: Chinese hamster lung cells
Metabolic activation: without metabolic activation
Method: OECD Test Guideline 473
Result: negative
Remarks: The value is given in analogy to the following substances: acetophenone
Test Type: Micronucleus test
Species: Mouse
Cell type: Red blood cells (erythrocytes)
Application Route: Intraperitoneal injection
Method: OECD Test Guideline 474
Result: negative
Remarks: The value is given in analogy to the following substances: acetophenone
Carcinogenicity
Classified based on available data. For more details, see section 2
Reproductive toxicity
Classified based on available data. For more details, see section 2
Specific target organ toxicity - single exposure
Classified based on available data. For more details, see section 2
Specific target organ toxicity - repeated exposure
Classified based on available data. For more details, see section 2
Aspiration hazard
Classified based on available data. For more details, see section 2

11.2 Additional Information

Repeated dose toxicity - Rat - male and female - Oral - 90 Days - NOAEL (No observed adverse effect level) - 250 mg/kg
Remarks: The value is given in analogy to the following substances: acetophenone
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Other dangerous properties can not be excluded.
Handle in accordance with good industrial hygiene and safety practice.

SECTION 12: Ecological information

12.1 Toxicity

Toxicity to fish flow-through test LC50 - Pimephales promelas (fathead minnow) - 162 mg/l - 96 h (OECD Test Guideline 203)
Remarks: The value is given in analogy to the following substances: acetophenone
Toxicity to daphnia static test LC50 - Daphnia magna (Water flea) - 528 mg/l - 48 h and other aquatic Remarks: (ECHA) invertebrates The value is given in analogy to the following substances: acetophenone
Toxicity to algae static test ErC50 - Pseudokirchneriella subcapitata (green algae) - 86.4 mg/l - 72 h (OECD Test Guideline 201)
Remarks: The value is given in analogy to the following substances: acetophenone
Toxicity to bacteria static test IC50 - activated sludge - > 1,000 mg/l - 3 h (OECD Test Guideline 209)
Remarks: The value is given in analogy to the following substances: acetophenone

12.2 Persistence and degradability

Biodegradability aerobic - Exposure time 14 d
Result: 64.7 % - Readily biodegradable.
(OECD Test Guideline 301C)
Remarks: The value is given in analogy to the following substances: acetophenone

12.3 Bioaccumulative potential

No data available

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

12.6 Endocrine disrupting properties

No data available

12.7 Other adverse effects

Discharge into the environment must be avoided.

SECTION 13: Disposal considerations

13.1 Waste treatment methods

Product
Offer surplus and non-recyclable solutions to a licensed disposal company.

SECTION 14: Transport information

14.1 UN number

ADR/RID: -
IMDG: -
IATA-DGR: 3334

14.2 UN proper shipping name

ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA-DGR: Aviation regulated liquid, n.o.s. (acetophenone-d₈)

14.3 Transport hazard class(es)

ADR/RID: -
IMDG: -
IATA-DGR: 9

14.4 Packaging group

ADR/RID: -
IMDG: -
IATA-DGR: III

14.5 Environmental hazards

ADR/RID: no
IMDG Marine pollutant: no
IATA-DGR: no

14.6 Special precautions for user

Based on chemical properties, choose appropriate tools and conditions of transport.
Transporting tools shall be equipped with appropriate and sufficient firefighting equipment and emergency leaking installations. If transporting by road, please go along the specified route.

14.7 Incompatible materials

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

National regulatory information
Law on the Prevention and Control of Occupational Diseases
Measures on the Environmental Administration of New Chemical Substances Registration
Registration/Notification number : B1A222214555
Downstream users need to comply with the conditions of safe use of the chemical, understand the environmental and health hazard and risk management measures identified on the SDS as well as the local/national regulations concerning the chemical.
Other regulations
Please pay attention on the waste treatment should also comply with local regulations requirement.

SECTION 16: Other information

Abbreviations and acronyms

CAS: Chemical Abstracts Service
TWA: Time-Weighted Average
STEL: Short-Term Exposure Limit
LD50: Lethal Dose 50%
LC50: Lethal Concentration 50%
EC50: Effective Concentration 50%
PEL: Permissible Exposure Limit
TLV: Threshold Limit Value
IMDG: International Maritime Dangerous Goods Code
IATA: International Air Transport Association
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
DOT: US Department of Transportation
NFPA: National Fire Protection Association
NIOSH: National Institute for Occupational Safety and Health
OSHA: Occupational Safety and Health Administration
Disclaimer:

The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.

Recommended Products
BENZALDEHYDE-D6 SDS BENZENE (1,3,5-D3) SDS ACETOPHENONE-D8 SDS TOLUENE (RING-D5) SDS ACETALDEHYDE-2,2,2-D3 SDS BENZENE-D1 SDS 3',5'-Bis(trifluoromethyl)acetophenone SDS 3'-CHLORO-5'-(TRIFLUOROMETHOXY)ACETOPHENONE SDS BENZENE-D5 SDS ACETOPHENONE-2',3',4',5',6'-D5 SDS