Ethyl 1H-1,2,3-triazole-5-carboxylate

Ethyl 1H-1,2,3-triazole-5-carboxylate Suppliers list
Company Name: J & K SCIENTIFIC LTD.  
Tel: 18210857532 18210857532
Email: jkinfo@jkchemical.com
Company Name: BeiJing Hwrk Chemicals Limted  
Tel: 0757-86329057 18934348241
Email: sales4.gd@hwrkchemical.com
Company Name: Wuhan ariel chemical Co., LTD.  
Tel: 18986259541 18986259541
Email: sales@3stc.com
Company Name: Shanghai Youd Chemical Technology Co., Ltd.  
Tel: 021-37910092 15821801668
Email: cong44@126.com
Company Name: Hangzhou Sage Chemical Co., Ltd.  
Tel: +86057186818502 13588463833
Email: info@sagechem.com

Ethyl 1H-1,2,3-triazole-5-carboxylate manufacturers

Ethyl 1H-1,2,3-triazole-5-carboxylate Basic information
Product Name:Ethyl 1H-1,2,3-triazole-5-carboxylate
Synonyms:3H-[1,2,3]TRIAZOLE-4-CARBOXYLIC ACID ETHYL ESTER;1H-1,2,3-TRIAZOLE-4-CARBOXYLIC ACID, ETHYL ESTER;1H-1,2,3-Triazole-4-carboxylicacid,ethylester(9CI);Ethyl 1H-1,2,3-triazole-5-carboxylate;1H-1,2,3-Triazole-5-carboxylic acid, ethyl ester;ethyl 2H-triazole-4-carboxylate;ethyl 1H-1,2,3-triazole-4-carboxylate
CAS:40594-98-7
MF:C5H7N3O2
MW:141.13
EINECS:
Product Categories:CARBOXYLICESTER
Mol File:40594-98-7.mol
Ethyl 1H-1,2,3-triazole-5-carboxylate Structure
Ethyl 1H-1,2,3-triazole-5-carboxylate Chemical Properties
Melting point 102-104 °C
Boiling point 284.7±13.0 °C(Predicted)
density 1.299±0.06 g/cm3(Predicted)
storage temp. under inert gas (nitrogen or Argon) at 2-8°C
pka6.94±0.70(Predicted)
AppearanceWhite to off-white Solid
Safety Information
HS Code 2933998090
MSDS Information
Ethyl 1H-1,2,3-triazole-5-carboxylate Usage And Synthesis
Uses1H-1,2,3-Triazole-5-carboxylic Acid Ethyl Ester is used in the synthesis potent inhibitors of bacterial β-lactamase.
Synthesis
Azidotrimethylsilane

4648-54-8

Ethyl propiolate

623-47-2

Ethyl 1H-1,2,3-triazole-5-carboxylate

40594-98-7

Ethyl propargylate and trimethylmethylsilyl azide were injected through a 2 mL loop in a Vapourtec R2+/R4 flow system equipped with three PTFE reactor coils (10 mL) and a 250 psi back pressure regulator. The flow rate was set at 0.5 mL/min and the residence time was 1.5 hours. The system was heated to 140°C. Injections were performed every 40 min and the solvent used was acetonitrile. The total mixture flowing from the reactor was collected and a total of 5 injections were performed. The collected mixtures were combined and the acetonitrile was removed under vacuum by rotary evaporator (the collection flask of the rotary evaporator was pre-filled with saturated aqueous NaHCO3 solution to quench any HN3 that might be generated). The residual solid was dissolved in ethyl acetate and the organic phase was washed with saturated brine (3 times), dried over anhydrous sodium sulfate, filtered and the solvent evaporated. The crude product was stirred with a minimal amount of ether, filtered and dried to give ethyl 1H-1,2,3-triazole-5-carboxylate (8.65 g, 81% yield) as a white solid. Mass spectrum (ESI): m/z=142.1 [M+H]+.

References[1] Journal of Heterocyclic Chemistry, 2009, vol. 46, # 1, p. 131 - 133
[2] Patent: WO2017/89389, 2017, A1. Location in patent: Page/Page column 35
Ethyl 1H-1,2,3-triazole-5-carboxylate Preparation Products And Raw materials
Raw materialsAzidotrimethylsilane-->Ethyl propiolate
Tag:Ethyl 1H-1,2,3-triazole-5-carboxylate(40594-98-7) Related Product Information
1,2,3-1H-Triazole RESMETHRIN Ethyl formate Benzocaine Urethane Methyl acrylate Ethyl cyanoacetate Ethylparaben ISOXADIFEN-ETHYL Ethyl acetate Ethyl acrylate Tris(trimethylsilyl)phosphate Ethanol Ethyl chloroformate ETHYL 1-(4-AMINO-1,2,5-OXADIAZOL-3-YL)-5-METHYL-1H-1,2,3-TRIAZOLE-4-CARBOXYLATE Ethyl 1H-1,2,3-triazole-5-carboxylate Poly-AminoEthylFormate CARBOXYLIC ACID