ChemicalBook > Product Catalog >Pharmaceutical intermediates >Bulk Drug Intermediates >2-Chloro-1-(3,4-difluoro-phenyl)-ethanone

2-Chloro-1-(3,4-difluoro-phenyl)-ethanone

2-Chloro-1-(3,4-difluoro-phenyl)-ethanone Suppliers list
Company Name: Shanghai Scochem Technology Co., Ltd.  Gold
Tel: 021-33758897
Email: sales@scochem.com
Company Name: Synthetics China Co.,Ltd  Gold
Tel: 65218020 18248732722
Email: cliff.ji@pharmsyn.com
Company Name: Hunan Xinbelai Biotechnology Co., LTD  Gold
Tel: 18667946270 18667946270
Email: wangzeren1@synbiolab.cn
Company Name: Chongqing Xingcan Pharmaceutical Technology Co., Ltd.  Gold
Tel: 13594048950 19923294409
Email: xingcanyaoye@sina.com
Company Name: J & K SCIENTIFIC LTD.  
Tel: 18210857532 18210857532
Email: jkinfo@jkchemical.com

2-Chloro-1-(3,4-difluoro-phenyl)-ethanone manufacturers

2-Chloro-1-(3,4-difluoro-phenyl)-ethanone Basic information
Product Name:2-Chloro-1-(3,4-difluoro-phenyl)-ethanone
Synonyms:2-CHLORO-1-(3,4-DIFLUORO-PHENYL)-ETHANONE;3,4-Difluorophenacyl chloride;a-Chloro-3,4-difluoroacetophenone;Ethanone,2-chloro-1-(3,4-difluorophenyl)-;Fluconazole Impurity 6;Ticagrelor Impurity 148;2-Chloro-1-(3,4-difluoro-phenyl)-ethanone ISO 9001:2015 REACH;2-chloro-1(3,4-difuorophenyl)ethanone
CAS:51336-95-9
MF:C8H5ClF2O
MW:190.57
EINECS:610-651-8
Product Categories:Acetophenone series;Methyl Halides;Phenyls & Phenyl-Het;Methyl Halides;Phenyls & Phenyl-Het
Mol File:51336-95-9.mol
2-Chloro-1-(3,4-difluoro-phenyl)-ethanone Structure
2-Chloro-1-(3,4-difluoro-phenyl)-ethanone Chemical Properties
Melting point 31-32 °C(Solv: ethanol (64-17-5); water (7732-18-5))
Boiling point 256.3±25.0 °C(Predicted)
density 1.353±0.06 g/cm3(Predicted)
storage temp. under inert gas (nitrogen or Argon) at 2-8°C
solubility soluble in Methanol
form powder to lump
color White to Light yellow
Sensitive Lachrymatory
InChIInChI=1S/C8H5ClF2O/c9-4-8(12)5-1-2-6(10)7(11)3-5/h1-3H,4H2
InChIKeyVMEDAWUIKFAFJQ-UHFFFAOYSA-N
SMILESC(=O)(C1=CC=C(F)C(F)=C1)CCl
CAS DataBase Reference51336-95-9(CAS DataBase Reference)
Safety Information
Hazard Codes C,Xi
RIDADR UN 3261 8/PG II
HazardClass IRRITANT
PackingGroup II
HS Code 2914790090
MSDS Information
2-Chloro-1-(3,4-difluoro-phenyl)-ethanone Usage And Synthesis
Uses2-Chloro-1-(3,4-difluoro-phenyl)-ethanone is mainly used as an organic synthesis intermediate component.  It can be used to prepare (1R,2R)-Ethyl 2-(3,4-difluorophenyl)cyclopropanecarboxylate, (1R,2S)-2-(3,4-Difluorophenyl)cyclopropanamine (R)-2-hydroxy-2- phenylacetate, and 2-Arylcyclopropylamines.
Synthesis

2-chloro-1-(3,4-difluorophenyl)ethanone preparation steps are as follows: quickly weigh 10.2g anhydrous aluminum trichloride, (finely ground), added to a dry four-necked flask, and immediately add 11.4mL of o-difluorobenzene (dried), the middle of the mouth mounted electric stirrer, the side of the mouth, respectively, the installation of thermometers, constant-pressure dropping funnel (containing a certain amount of purified acetic anhydride, the top of the spherical condensing tube Connected to a dry tube equipped with anhydrous calcium chloride and toxic gas absorption device (absorption solution for 5% NaOH solution), under uniform stirring, from the constant pressure dropping funnel slowly dripping acetic anhydride, adjust the drop acceleration, so that the reaction temperature is controlled at 60 below the temperature rise in the process of dropping, there are a large number of white gas escapes, the solution color deepens, dropping is completed, the solution is lavender viscous. Heating reflux reaction with an oil bath until no HCl gas escapes, the solution becomes light brown. Remove the gas absorption device, after cooling, the four-necked flask in a cold water bath, add a certain amount of ice-water mixture under stirring, the solids are all dissolved (if not dissolved, add a small amount of concentrated hydrochloric acid dropwise). The reaction is transferred to a partition funnel, the organic layer is separated, the aqueous layer is extracted with toluene in two batches, and finally the toluene layer is combined, the toluene layer is washed with 5% NaOH solution, distilled water, respectively, until the aqueous layer is pH=7. The toluene as well as a small amount of the water mixture is removed by rotary evaporation and recovered, and the residue is subjected to decompression distillation for the collection of 25 . The fraction at 125-126C at mmHg (boiling point of 2-chloro-1-(3,4-difluorophenyl)ethanone is 245-247C at atmospheric pressure) was a brown oily liquid.

Tag:2-Chloro-1-(3,4-difluoro-phenyl)-ethanone(51336-95-9) Related Product Information
4'-(Trifluoromethyl)acetophenone 2-chloro-1-(2,3-difluorophenyl)ethanone DIPHENYLCYCLOPROPENONE L-PICEIN Chlorodimethylphenylsilane tert-Butylchlorodiphenylsilane Triphenylmethyl Chloride 4-Fluoroacetophenone PHENYL VALERATE 3'-Chloroacetophenone CHLOROPHENYLSILANE Ticagrelor Sulfone 2-(((3aR,4S,6R,6aS)-6-(7-aMino-5-(propylthio)-3H-[1,2,3]triazolo[4,5-d]pyriMidin-3-yl)-2,2-diMethyltetrahydro-3aH-cyclopenta[d][1,3]dioxol-4-yl)oxy)ethanol (3aR,4S,6R,6aS)-6-(7-(((1R,2S)-2-(3,4-difluorophenyl)cyclopropyl)aMino)-5-(propylthio)-3H-[1,2,3]triazolo[4,5-d]pyriMidin-3-yl)-2,2- Ticagrelor Related Compound 3 TRANSAMINE 1,2-Cyclopentanediol, 3-[7-aMino-5-(propylthio)-3H-1,2,3-triazolo[4,5-d]pyriMidin-3-yl]-5-(2-hydroxyethoxy)-, (1S,2S,3R,5S)- 4-Chloro-2-propylsulfanyl-pyrimidine